According to Ve7ihl: While burning my CPU.
>
> Here is my dumb Linux question for today:
>
> How do you set the serial port (/dev/ttyS0) baud rate ?
> What utility prgram do you use ?
'setserial'
>
> I want to set the baud rate to 9600 baud, and then use the 'echo'
> command to issue the commands to my TNC to get it into KISS mode on
> system startup.
>
> How have others been doing this ?
Normaly one would use minicom to get the TNC into kiss mode.
If you have never used minicom start it with the 'minicom -s' that will
allow you to change or set serial paramters and comports.
Then after minicom has started use;
kiss on
restart
depress ctrl-a then x to exit minicom.
Now you can use the ax25-utilitys.
If the need arise to get the TNC back out of kiss you can try.
kissparms -p<port_name> -x
BTW: minicom is very simalar to the old dos programs 'telix' and 'procomm'
>
> Thansk for you help
>
> Lane, ve7ihl
>
--
Regards Richard.
[EMAIL PROTECTED]
Merry Xmas to all, and may all your troubles be small (ones).
