Karl wrote:
> Hi John, I have adjusted the RX side of the tnc-2 this way for 12 years
> and have great success. Open the squelch on the receiver and with no
> signal present on the frequency, decrease the audio level until the DCD
> light is just "on" solid. Close the squelch and go home.
This shows that you have not bothered to modify your DCD circuits to only lock
in on data transmissions (N7CL mod), thus enabling the use of open squelch on
your receivers. For those people who have performed this extremely simple
alteration to their TNC-2's (and it *is* a worthwhile mod), your procedure
helps not at all...
73,
Brett
