second try
Hello, I'am trying to make a dos machine with BPQ to talk with linux via ax25 and ethernet. By reading ax25-howto the bpq device is associated with eth0 With "# /sbin/ifconfig bpq0 hw ax25 pi4cc-7 comment" I do config the eth0 device. When I start calling pi4cc-7 at the dos machine the packets a received at eth0. The rx pactkets is counting. But there will be no link. The bpq0 doen't receive any packet. My question: whats wrong? Here is a copy of ifconfig: lo Link encap:Local Loopback inet addr:127.0.0.1 Bcast:127.255.255.255 Mask:255.0.0.0 UP BROADCAST LOOPBACK RUNNING MTU:3584 Metric:1 RX packets:1657 errors:0 dropped:0 overruns:0 frame:0 TX packets:1657 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 eth0 Link encap:Ethernet HWaddr 52:54:4C:02:EB:50 inet addr:10.0.0.0 Bcast:10.255.255.255 Mask:255.0.0.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:30 errors:0 dropped:0 overruns:0 frame:0 TX packets:150 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 Interrupt:5 Base address:0x300 bpq0 Link encap:AMPR AX.25 HWaddr PI4CC-7 inet addr:192.168.0.1 Mask:255.255.255.0 UP RUNNING MTU:256 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 ax0 Link encap:AMPR AX.25 HWaddr PI4CC inet addr:192.168.0.1 Mask:255.255.255.0 UP RUNNING MTU:255 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 73 peter PB0AIU
