I�am trying to make a dos and a linux pc talk to each other via ax25 and
ethernet. So this is a linux/flexnet mixed question.
I do have 2 pc�s. One is running dos with flexnet version 3.3e on it. De
module ether is loaded without any comment.
The other is running linux with ax25. The connection between those 2 is
ethernet. The connection is only coax with two 50 ohm terminators and no
other pc�s.
When I start calling at flexnet (pb0aiu) the linux pc (pi4cc) is
responding. Here is a sample from listen -a:
Port bpq0: AX25: PB0AIU->PI4CC (C C P)
Port bpq0: AX25: PI4CC->PB0AIU (UA R F)
So far, so good. But the flexnet pc keeps on calling and doesn�t receive
any packets from linux. The counter TX packets at eth0 is increasing (at
linux) but at flexnet de rxpackets (stat) is still zero.
Where do I have to look at? Dos or Linux end?
What are the minimum configuration files at linux to talk via AX25 over
ethernet? Are there some sample config files on internet for ax25d,
axports or startup scripts? Do I need more to config?
Are there also some samples of flexnet startup script?
Any comment is welcome.
73 peter
PB0AIU
