I'm running axutils under Redhat 6.0, and things seem to be basically working.
(Though I
don't use any Netrom stuff.)
Here's a slight oddity though. When I type 'telnet w6yx.ampr.org' which is 1 hop away
from here, the very first time, I"ll get 'no route to host' for the ip adress, which is
correctly resolved. Then, right away, I'll 'telnet w6yx.ampr.org' again, and it works
fine. I get in no problem. How do I go about diagnosing this -- or figuring out
what's
happening. Here's the setup for the soundmodem. Also, right now I'm not really sure
what
'window' and 'irtt' do -- and I just guessed at sensible numbers.
/usr/sbin/sethdlc -p -i sm0 mode sbc:afsk1200 io 0x220 irq 5 dma 1 pario 0x378
/usr/sbin/sethdlc -i sm0 -a txd 200 slot 50 ppersist 128 half
/sbin/ifconfig sm0 hw ax25 KE6I-1 up
/sbin/ifconfig sm0 44.4.28.50 netmask 255.255.255.0 up
/sbin/ifconfig sm0 broadcast 44.4.255.255 mtu 512
/sbin/route add -net 44.4.0.0 netmask 255.255.240.0 window 128 irtt 2000 dev sm0
/sbin/route add -net 44.4.0.196 window 128 irtt 2000 dev sm0
/sbin/route add -net 44.0.0.0 netmask 255.0.0.0 gw 44.4.0.196
