Hi to ALL
Well i hope to get some answer by Jean-Paul
by this time.
on last week i sent a mail about xfbb-7.01a not answer by anything
now is my second and last time i send this
the problem i see on fbb y rh-6.0 i don't know whats happening
i have the new tools everything got well i'm running right now
the Jnos with two ports on RF link over the new ax25-tools
but the fbb just works on telnet connection via ethernet or via internet
just telnet port, when set-up the two ports i have working to fbb
fbb initialized fine, but when someone try to connect via RF channel or
i try to connect by console on telnet it goes down, if it not has axport
set-up
fbb goes well just on telnet not RF link
it send something like this:
Running XFBB ^C to abort
Starting XFBB (pwd = /usr/local/fbb)...
*********************************************************
* XFBB Linux daemon version 7.01a1 (Aug 16 1999) PID=1024
*********************************************************
setsockopt : AX25_BACKOFF: Protocolo no disponible
Message : Error init LINUX port 1
setsockopt : AX25_BACKOFF: Protocolo no disponible
Message : Error init LINUX port 2
xfbbC/X server running ...
xfbbd ready and running ...
xfbbd : Segmentation violation <------- this start when someone try to
connect me
on RF link or by telnet via (internet)
Unknown return value 5
----------------------------------------------------
The BACKOFF_TYPE is setup 0 on the /proc/sys/net/ax25/ax0 and ax1
whats the problem here ?????
and other thing i can't to compile the X11 Part on the RH-6.0
i have the kernel 2.2.11 glibc-2.1 pgcc-2.91 Lesstif-0.88.9 etc etc.
all is needed for the ax25 utilities
73's Jose (hi8gn)
------
Email : [EMAIL PROTECTED]
Url : http://hi8gn.dynip.com/
