I would be very grateful for help with the following problem - I am relatively in-experienced with Linux ! I have spent a lot of time reading and re-reading the how-tos and scanning Usenet via dejanews but I am still unable to find a solution. I am using SuSE 6.0 (2.0.36) and have complied the BAYCOM serial driver into the Kernel. I used a rpm (from SuSE) which is ax25-util-2.1.4.2a-12.and the version of call (from call -v) is ax25-utils-2.1.42a -11 Aug 1997 The Baycom modem and kernel appears to work as I can monitor local packet traffic using the listen command. However when I try to use the call program I have problems. I call my bc0 port "radio" with callsign G1PVZ-1in etc/ax25/axport file. I have used the following commands- setserial /dev/ttyS2 uart none sethdlc -p -i bc0 mode ser12 io 0x3e8 irq 9 ifconfig bc0 hw ax25 G1PVZ-1 up When I type the command call radio GB7YEO I get the following GW4PTS AX.25 Connect V1.11 bind: Invalid argument. Many thanks, James Vincent G1PVZ
