On Thu, Oct 07, aCiDeViL wrote:
> Hello all
> I need some help because wiht this problem ...
> I have SuSe 6.0 wiht kernel 2.0.36
> i�m tring to install in my linux box the ax25 suport for my modem baycom on
> serial port , I have alredy install the ax25-utils without errors but hen i
> try to load the drive for configure my modem it gives-me this error
> menssage , it sims i dont have the sethdlc command
>
> # setserial /dev/ttyS0 uart none
> # insmod hdlcdrv
> # insmod baycom mode="ser12*" iobase=0x3f8 irq=4
> # sethdlc -p -i bc0 mode "ser12*" io 0x3f8 irq 4
> bash: sethdlc: command not found
Did you compile the ax25-utils on your own or did you install a rpm
archive? If you try the one from
ftp://ftp.suse.com/pub/projects/ham/i386/ax25util-2.1.42a-12.i386.rpm
you will find a "/usr/sbin/sethdlc" after installation.
Regards, Kai
--
Kai Altenfelder, SuSE GmbH, Schanzaeckerstr. 10, D-90443 Nuernberg
Tel.: +49-911-74053-0, Fax: +49-911-3206727, EMail: [EMAIL PROTECTED]
Ham: DL3LBA PGP public key available
