Have you attached the ax25 devices, and configured them via the files in
/etc/ax25? If not, you need to do that first. My web site has some
example configuration files available under
http://www.febo.com/linux-ax25/index.html
If you've done all that, the problem may be with permissions. I was recently
bitten by this when I was installing the CLX cluster software. It runs as
its own user, and I got the same error messages you did when trying to
connect to a remote cluster.
It turns out that my /etc/ax25 directory was owned by root (naturally) but
was not readable by anyone else. Opening up the read permissions solved
the problem.
Hope this helps.
73,
John N8UR
[EMAIL PROTECTED]
http://www.febo.com
In message <[EMAIL PROTECTED]>, "Guillerm
o Palli" writes:
>Hello everybody!
>
>I'm trying to install the F6BB BBS system in a Linux RH 6.0 machine, is a
>486/DX4 100MHz with 12MB Ram. I have a TNC for use with serial port. I have
>succesfuly installed the Linux (rebuild of Kernel was done!), and installed
>the F6BB system. But, I have some error messages when I start the BBS.
>
>>axconfig: unable to open axport file
>>nrconfig: unable to open nrport file
>>rscontig: unable to open rsport file
>>invalid port name ax0
>>message: error init Linux port 1
>
>What is wrong?, I forget something?, sorry if that is obvious but i'm new
>with packet and linux :)
>
>Thank you in advance
>
>73 & DX's
>
>Guillermo Palli
>LW7DDV
>
