I misses that e-mail. Could you e-mail it again to me?
Thanks.
From: "Robert Schelander" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>, <[EMAIL PROTECTED]>
Subject: Re: SCC with 9k6.
Date sent: Thu, 4 Nov 1999 19:45:27 +0100
Send reply to: [EMAIL PROTECTED]
> Note that 9k6 needs an NRZ datastream while
> 1k2 needs NRZI!
> Check whether you've done the correct settings
> in the z8530.conf file.
> A few mails above (Re: USCC card problem using linux)
> you can find a working solution for 1200 and 9600.
>
> Robert
>
>
> -----Urspr�ngliche Nachricht-----
> Von: Alessandro Ren <[EMAIL PROTECTED]>
> An: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
> Datum: Donnerstag, 04. November 1999 17:31
> Betreff: SCC with 9k6.
>
>
>
> Hello all,
>
> I bought a UHF dataradio to use it with my SCC 9k6 board, but
> I cound�t get it to work under 9k6. It worked just fine at 1k2, but
> when a swtched to 9k6, no trafiic could be sent or received. Excluding
> cable connections, where could I be doing wrong?? I am using Linux and
> the device is the SCC1. Thanks for help.
>
> Alessandro Ren
> [EMAIL PROTECTED]
> "You can not save the world, but you can help to"
> "The world is what you make of it"
>
Alessandro Ren
[EMAIL PROTECTED]
"You can not save the world, but you can help to"
"The world is what you make of it"
