Robert Steinhaeusser wrote:
> The TNC2H has a TheFirmware-EPROM as default. You will have to switch the
> TNC to KISS-mode before starting kissattach. Or, the standard
> TNC2-KISS-EPROM *should* work as well. But it would be better to use the
> 6PACK-EPROM then (I believe you can get it at
Here's how to swich automatically your TF-EPROM to kiss mode : add the
following lines just before your kissattach command :
stty 9600 < /dev/ttyS0 > /dev/ttyS0 (9600 is the baudrate between
PC and TNC)
echo -e "\033@KISS ON\r" < /dev/ttyS0 > /dev/ttyS0
kissattach etc...
This works on my TNC2C but it should work fine on *any* TheFirmware
EPROM. Not tested on TNC2H, anyway. 6pack untested, too.
Hope this helps...
Toussaint.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Toussaint OTTAVI -= TK1BI =- -= BC 109 Soft =-
Phone : (+33) 6.10.28.41.72 (GSM) Email : [EMAIL PROTECTED]
Mail : B.P. 223, F-20179 AJACCIO Packet: [EMAIL PROTECTED]
