On Mon, 29 Nov 1999, Fabio Mantovani, IZ4AFW wrote:
> Hi guys!
>
> After setting up the modem with sethdlc (all ok) I try "call".
> Please notice that I never get error messages of any sort, but the program
> simply doesn't work...
> I can't get neither TX nor RX on the baycom... and a RS232 analyzer shows
> no activity on the port...
> I also tried "cat /proc/interrupts" and this showed no increase in the
> interrupt count, so I think it's something software- or kernel-related....
Try to use the modem in DOS. If it works it means you have the same
problem as I did. Probably the baycom driver for Linux is incompatible
with your serial port UART. I had the same problem on my Pentiums.
You have two options:
1st: Install the new 2.2.13 kernel;
2nd: Buy the YAM modem kit and then you can use it at 1200, 2400, 4800
or 9600.
I have opted by the two options at the same time. :-)
Regards,
Jorge Matias
