On Wed, 08 Dec 1999, Jean-Jacques Duquenoy wrote about, 2 SCC cards:
> Hello,
>
> I would like to use 2 SCC at�pra cards .( PA0HPZ like).
> I read, sometime ago, to use : vector=0 .
> Do i declare "vector=0" in Z8530drv.conf for the four chips ?
Well the PA0HZP card itself needs a different PAL on the second card, i
have not used a second card under linux but i suspect it needs to be the
same as it would under dos for the reason that the PAL has the address in
it, the first card is always 0x168 the second would then need another
address.
So as i see it the first board stays the same, the second would be defined
with its own address.
I belive the PE1PET version which is taken from the PA0HZP card, has dip
switch settings instead of a PAL, so that would make it more easier to
configure, i say that with reservations as i do not have one here and i
cant find the documentation at this minute to check the facts.
So i dont think your idea is valid.
> Best regards,
> Jean-Jacques - F5LXS
> [EMAIL PROTECTED]
--
Regards Richard
[EMAIL PROTECTED]
http://people.zeelandnet.nl/pa3gcu/
