In message <[EMAIL PROTECTED]>, Peter
Hallgarten <[EMAIL PROTECTED]> writes
>Hello,
>
>has anybody had any experience with this card under linux (i am
>still using 2.0.36, must upgrade to 2.2 soon). The card only does
>int 2 3 4 and 5 so 5 is the only option.
The MS400 Card works fine. It is possible to use other IRQs - given a
small piece of stripboard (Veroboard or similar 0.1 inch pitch) and a
simple buffer / gate TTL setup which is plugged into the ISA bus. This
can give access to IRQs 11, 12, 15 (also 14 & 16 but they may be spoken
for by other Hardware).
Another local has gated all four port IRQ selects into a single IRQ
albeit he used IRQ5 or 7, I seem to recall.
My MS400 has been running sweetly under Linux for some years now, mail
me if you would like any more details.
+------------------+-----------------------------------------------+
| Andy Scott | Internet: [EMAIL PROTECTED] |
| Little Chalfont | Amprnet : [EMAIL PROTECTED] |
| Bucks | BBS : g4tnu@GB7TVG.#42.GBR.EU |
+------------------+-----------------------------------------------+
