On Wed, Feb 02, 2000 at 06:36:18PM -0700, Brian J. McCarthy wrote:
> I have tried to get these serial line added to my Linux machine (RH 6.1 with
> 2.2.14). I do not understand what the trouble is.
>
> Output from setserial
> =========================================================
[...]
> /dev/ttyS2: Device or resource busy
> /dev/ttyS3: Device or resource busy
>
>
> =========================================================
>
>
> The card I am adding is http://www.siig.com/io/i_o_expander_4s.html.
>
> I am setting port A to 3E8/IRQ4 and port B to 2E8/IRQ3. The unboard Serial
> ports are 3F8/IRQ4 and 2F8/IRQ3. This should be the defaul config. Will
> interrupt sharing work accross different cards? What could I do to enable
Both PCI: yes
onboard ISA: no, never
both ISA: yes, with hardware modification
one ISA, other PCI: no
BUT: I think this has nothing to do with that error-message. Can you post
'cat /proc/ioports' output?
> these serial ports ??
>
>
> Brian McCarthy
> N7TUQ
>
Thorsten
--
| Thorsten Kranzkowski Internet: [EMAIL PROTECTED] |
| Mobile: ++49 161 7210230 Snail: Niemannsweg 30, 49201 Dissen, Germany |
| Ampr: dl8bcu@db0lj.#rpl.deu.eu, [EMAIL PROTECTED] [44.130.8.19] |
