On Sat, 12 Feb 2000, Joerg Reuter wrote:
> That doesn't look right, indeed. First try to increase your T1
> timer setting -- it may be far too low. If that doesn't solve
> your problem, the serial port of the Linux box is probably set to
> "local echo". Try an "stty -echo </dev/ttyS0" (or whatever the
> serial port is) before the kissattach.
Timer settings doesn't effect anything here, that's what i
tried before. But the stty command remindered me what i have
done when i was at cluster's qth. I switched on and off the
ax0 device and tried a bit with speed settings on stty, which
failed for some reason without my observing. After down ax0 again
and initialize the speed setting with stty 38400 < /dev/ttyS0
(normally done by script on startup), all is nice and fine.
Thanks Joerg !
73 Stephan, DK8LV
--
Join http://www.dk0wcy.de/magneto/magnet.htm or
http://db0fhf.ampr.org (44.130.127.111) for realtime Magnetometer,
our Aurora Warning Beacon Project !
[ ] dk8lv@db0hes.#slh.deu.eu
[*] [EMAIL PROTECTED]
[ ] [EMAIL PROTECTED]
