On Sat, 12 Feb 2000, Terry Dawson wrote:
> Chris Smith wrote:
>
> > I run kissnetd /dev/ptyzf /dev/ptyze &
> > Then kissattach /dev/ptyzf <port> <ipaddr>
> > and get : kissattach: open: Input/output error
>
> kissnetd should be opening the slave end of the pty, and kissattach
> should be opening the master end.
> You've got them both opening the same end.
Note that a long time ago when I experimented with kissnetd I noticed it
doesn't want to work on the slave side. I don't know if this is still the
case but at the time it certainly was. So the advise goes: kissnetd on the
master side, kissattach on the slave side.
Just a hint if all else fails...
--
Tomi Manninen Internet: [EMAIL PROTECTED]
OH2BNS AX.25: [EMAIL PROTECTED]
KP20ME04 Amprnet: [EMAIL PROTECTED]
