On Sat, 11 Mar 2000, Jose R. Marte A. wrote:
> Hey Om don't use my IP 44.175.18.2 there
> I'm use it here it is my IP range for Dominican Republic
Ok Disculpa solo lo hice como prueba para la configuracion...., ahora lo cambio
por otra sabes cua puede ser universal para ham como 127.0.01
Ernesto
73's
> it isn't for Argentina, try a private IP on the Range of
> 192.168.0.x or 10.0.0.x
>
> Please don't use my IP it is active on internet OK....
Sorry i probe this configurated... both not run.....
>
> and other hand you not need the ax25-utils-2.1.42a
> just the libax25-0.0.7 ax25-tools-0.0.5 and ax25-apps-0.0.4
> the net-tools RH6.0 has it installed
>
ok
> and then this, i think that you need to do something before
> like configure you axports and everything involve the ax25 stuff
>
> 73's Jose (hi8gn)
> [EMAIL PROTECTED] [44.175.18.1]
> http://lnx.hi8gn.ampr.org/ [44.175.18.3]
Jose la configuracion la saque de un ejemplo tuyo por eso esta esa IP .....
Ah Creo que te envie un mail ya que tu pagina es muy pero muy buena!!!!
Felicitaciones.
>
> and the other ip is my notebook with a hanheld
> nos.hi8gn.ampr.org [44.175.18.2]
>
>
> ----------
> > From: Ernesto Giaquinta <[EMAIL PROTECTED]>
> > To: [EMAIL PROTECTED]
> > Subject: redhat 6.0
> > Date: Saturday, March 11, 2000 1:47 PM
> >
> > Hello to all:
> >
> > I have instaled RH6.0 with nettools 1.52, libax25-0.0.5, ax25-tool-0.0.5
> and
> > ax25-0.0.4 and ax25-utils-2.1.42a.......
> > My modem is baycom half
> > My scripts /etc/ax25/rc.ax25
> > #!/bin/sh
> > insmod ax25
> > setserial /dev/ttyS1 uart none port 0x2f8 irq 3
> > insmod hdlcdrv
> > insmod baycom_ser_hdx iobase="ser12*" iobase=0x2f8 irq=3
> > sethdlc -i bcsh0 -p mode "ser12*" io 0x2f8 irq 3
> > sethdlc -i bcsh0 -a txd 200 slot 100 ppersist 40 half >/dev/null 2>&1
> > ifconfig bcsh0 44.175.18.2 hw ax25 LU6MHO netmask 255.255.255.0
> > My /etc/ax25/axports
> > #
> > #
> > bcsh0 LU6MHO 1200 250 1 145.070
> > #
> >
> > But no run
> > run listen bcsh0 messages is
> > axconfig 1 not active
> > axconfig 2 not active
> > listen> no ax.25 port data configured
> > both moniton port run
> > and call bcsh0 lu1ma the messages is idem
> > both no call station
> >
> > thank for reading my message and sorry my poor english......
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
