On Mon, 10 Apr 2000, jerome schatten wrote:
> John... I went through this years ago running a 1278 in kiss mode on
> an fbb bbs. As soon as it receives a string which is the same as
> the KISSOFF command, it drops out of kiss mode. I can't remember what
> the hex sequence was, but it was reproducible. No-one was able to
> fix it, and it seemed true across all 1278's in this area.
The "kiss off" sequence in hex is 0xC0 0xFF 0xC0 and it can never appear
in a valid kiss data flow. So there must be more than that to it if it
really was happening in response to serial data to the TNC.
Long ago I had a problem with a Symek TNC2S with the TAPR firmware that
came with it. It would just reset itself after a while. But IIRC it stayed
in KISS mode, it flashed the LEDs three times and forgot the channel
access parameters... Anyway it was a bug in the firmware.
--
Tomi Manninen Internet: [EMAIL PROTECTED]
OH2BNS AX.25: [EMAIL PROTECTED]
KP20ME04 Amprnet: [EMAIL PROTECTED]
