Am I doing this right? I have a baycom on com2, and run this:
setserial /dev/ttyS1 uart none
modprobe baycom_ser_fdx mode="ser12*" iobase=0x2f8 irq=3
/root/ax25-tools-0.0.6/hdlcutil/sethdlc -i bcsf0 -p mode "ser12*" io
0x2f8 irq 3
/sbin/ifconfig bcsf0 hw ax25 KE2LJ-1 up
/usr/local/bin/kissattach /dev/ttyS1 radio 44.68.8.141
The output is:
/root/ax25-tools-0.0.6/hdlcutil/sethdlc: Version 0.5; (C) 1996-1997 by
Thomas Sailer HB9JNX/AE4WA
driver name: baycom_ser_fdx
current parameters: mode ser12* io 0x2f8 irq 3
new parameters: mode ser12* io 0x2f8 irq 3
kissattach: SIOCGIFNAME: Input/output error
My axports contains this one line:
radio KE2LJ-1 0 255 2 2 meter radio
Any idea whats wrong? Thanks. -pat
*-----------------------------------------------------------------------------*
* Pat Masterson B38-01, Northrop Grumman, * Ham:KE2LJ
* 20 Orville Road, * President Grumman Amateur
* Bohemia, NY * Radio Club WA2LQO
* email: [EMAIL PROTECTED] Fone: 631-218-6746 * www.qsl.net/wa2lqo
*-----------------------------------------------------------------------------*
