On Sun, 11 Jun 2000, charlie carroll wrote about, what am I missing here?:
> I just got RedHat 6.0 installed (2.2.5-15 kernel) and am having problems
> with the kissattach command after getting the ax-25 utils RPM
> installed. when I do a /usr/sbin/kissattach /dev/ttyS0 radio, I get
> the following...
> kissattach: TIOCSETD: Invalid argument.
kissattach -l -m 256 /dev/ttyS0 radio 44.52.0.254
Is how it should be, note the -l -m do not need to be used.
-l = logg to the system log
-m set mtu (if none given paclen in axports is used)
Or it could be that you have not loaded the mkiss module, or no mkiss
compiled into the kernel.
>
> I've tried a couple different TNCs with different speeds in the axports
> file, but get the same error in each case. I am, however, able to talk
> to each TNC using minicom and can also change the KISS state of the TNC
> while using minicom.
>
> This has got to be something simple, but I'm new to Linux. Help would
> be appreciated.
>
> 73 charlie, k1xx
--
Regards Richard
[EMAIL PROTECTED]
http://people.zeelandnet.nl/pa3gcu/
