I have just spent the last two days, installing, and re-installing zipslack
7 onto one of my machines to use as part of my BBS/node/cluster system.
I now find that ax25d won't load.
I get the following errors...
axconfig: port yam0 not active
axconfig: port scc0 not active
axconfig: port scc1 not active
axconfig: port axip not active
ax25d: no AX25 port data configured
For some reason, ax25d is looking in /usr/local/etc/ax25 for the config,
rather than in /etc/ax25
so I have put the config files in both places just in case - I don't know
the reason for this.
I also attach my axports file for reference.
The axip port is not important, and I can do away with it to get things
going if need be.
ifconfig reports all ports are there and active.
Anyone got any ideas? Have I got to recompile the tools/apps/libs etc..
Using Slackware 7, Zipslack kernel 2.2.13
ax25-tools-0.0.5
ax25-apps-0.0.4
libax25-0.0.7
node-0.3.0
on a Intel 486DX2/66 32Mb / 240Mb HD workstation.
I have also tried Mini-Linux, but the YAM won't work with that (kernel
2.2.15b) for some reason as the serial port won't release for yamdrv to take
control.
Regards
Rob G1ZPU / GB7ZPU
===================================================================
Get paid to surf the web, tell your friends, and get paid while they surf
too!
Check out: http://www.teamdangerous.com
Links, Motorsport, A look a the lighter side of Amateur Radio, Homebrewing
and more
===================================================================
