Marco Calistri wrote:
>
> Hello everybody,hope my question will be pertinent
> with this list...
>
> I have a i486 with a ISA third-party high speed,
> com card (com 3) which under windows figures irq 7,
> but under linux (independently from kernel 2.0.38 or 2.2.14-5.0)
> it is recognized as ttyS2 with irq 4.
Did you try some manual setup :
setserial /dev/ttyS2 uart 16550A port 0x3E8 irq 7
Of course, you should replace 0x3E8 by <your> address, and also you may
have to change your UART type according to your chipset. Use
'man setserial' for further information.
The setserial command should be set somewhere in your rc scripts
(/etc/rc.d/serial with SuSE distributions).
Hope this helps. Best 73's,
--
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
Toussaint OTTAVI -= TK1BI =- -= BC 109 Soft =-
Phone : (+33) 6.10.28.41.72 (GSM) Email : [EMAIL PROTECTED]
Mail : B.P. 223, F-20179 AJACCIO Packet: [EMAIL PROTECTED]
