On Sun, Mar 09, 2025 at 01:45:51AM +0100, David Heidelberg via B4 Relay wrote:
> From: Ivan Belokobylskiy <[email protected]>
>
> Add initial support for LG Nexus 4 (mako).
>
> Features currently working: regulators, eMMC, WiFi, and volume keys.
>
> Signed-off-by: Ivan Belokobylskiy <[email protected]>
> Signed-off-by: David Heidelberg <[email protected]>
> ---
> Changes in v3:
> - rebased against next-20250307
> - dropped backlight until driver gets converted to DT
>
> Changes in v2:
> - lge vendor doesn't exist anymore, rename to lg
> - sdcc@ to mmc@ to comply with dt-schema
> ---
> arch/arm/boot/dts/qcom/Makefile | 1 +
> .../boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dts | 342
> +++++++++++++++++++++
> 2 files changed, 343 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile
> index
> f06c6d425e91dd73c2b453d15543d95bd32383b9..0c1d116f6e84f76994aa8c8286350bdcd1657a42
> 100644
> --- a/arch/arm/boot/dts/qcom/Makefile
> +++ b/arch/arm/boot/dts/qcom/Makefile
> @@ -12,6 +12,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
> qcom-apq8064-ifc6410.dtb \
> qcom-apq8064-sony-xperia-lagan-yuga.dtb \
> qcom-apq8064-asus-nexus7-flo.dtb \
> + qcom-apq8064-lg-nexus4-mako.dtb \
> qcom-apq8074-dragonboard.dtb \
> qcom-apq8084-ifc6540.dtb \
> qcom-apq8084-mtp.dtb \
> diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dts
> b/arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dts
> new file mode 100644
> index
> 0000000000000000000000000000000000000000..bcb57675aa24892b290d543601f7a6b36b6a65f6
> --- /dev/null
> +++ b/arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dts
> @@ -0,0 +1,342 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +#include "qcom-apq8064-v2.0.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/mfd/qcom-rpm.h>
> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
> +/ {
> + model = "LG Nexus 4 (mako)";
> + compatible = "lg,nexus4-mako", "qcom,apq8064";
> +
> + aliases {
> + serial0 = &gsbi7_serial;
> + serial1 = &gsbi6_serial;
> + serial2 = &gsbi4_serial;
> + };
> +
> + chosen {
> + stdout-path = "serial2:115200n8";
> + };
> +
> + reserved-memory {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + ramoops@88d00000{
> + compatible = "ramoops";
> + reg = <0x88d00000 0x100000>;
> + record-size = <0x00020000>;
> + console-size = <0x00020000>;
> + ftrace-size = <0x00020000>;
> + };
> + };
> +
> + battery_cell: battery-cell {
> + compatible = "simple-battery";
> + constant-charge-current-max-microamp = <900000>;
> + operating-range-celsius = <0 45>;
> + };
> +
> + soc {
> + rpm@108000 {
Please use &rpm { ... }; instead.
> + regulators {
> + vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
> + vin_lvs1_3_6-supply = <&pm8921_s4>;
Please move vin_lvs2-supply here.
> + vin_lvs4_5_7-supply = <&pm8921_s4>;
> +
Please move vdd_l1_l2_l12_l18 here.
> + vdd_l24-supply = <&pm8921_s1>;
> + vdd_l25-supply = <&pm8921_s1>;
> + vin_lvs2-supply = <&pm8921_s1>;
> +
> + vdd_l26-supply = <&pm8921_s7>;
> + vdd_l27-supply = <&pm8921_s7>;
> + vdd_l28-supply = <&pm8921_s7>;
> +
> + /* Buck SMPS */
> + s1 {
> + regulator-always-on;
> + regulator-min-microvolt = <1225000>;
> + regulator-max-microvolt = <1225000>;
> + qcom,switch-mode-frequency = <3200000>;
> + bias-pull-down;
> + };
empty line
> + s2 {
> + regulator-min-microvolt = <1300000>;
> + regulator-max-microvolt = <1300000>;
> + qcom,switch-mode-frequency = <1600000>;
> + bias-pull-down;
> + };
> +
> + /* msm otg HSUSB_VDDCX */
> + s3 {
> + regulator-min-microvolt = <500000>;
> + regulator-max-microvolt = <1150000>;
> + qcom,switch-mode-frequency = <4800000>;
> + bias-pull-down;
> + };
> +
> + /*
> + * msm_sdcc.1-sdc-vdd_io
> + * tabla2x-slim-CDC_VDDA_RX
> + * tabla2x-slim-CDC_VDDA_TX
> + * tabla2x-slim-CDC_VDD_CP
> + * tabla2x-slim-VDDIO_CDC
> + */
> + s4 {
> + regulator-always-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + qcom,switch-mode-frequency = <1600000>;
> + bias-pull-down;
> + qcom,force-mode =
> <QCOM_RPM_FORCE_MODE_AUTO>;
> + };
> +
> + /*
> + * supply vdd_l26, vdd_l27, vdd_l28
> + */
> + s7 {
> + regulator-min-microvolt = <1300000>;
> + regulator-max-microvolt = <1300000>;
> + qcom,switch-mode-frequency = <3200000>;
> + };
> +
> + s8 {
> + regulator-min-microvolt = <2200000>;
> + regulator-max-microvolt = <2200000>;
> + qcom,switch-mode-frequency = <1600000>;
> + };
> +
> + l1 {
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1100000>;
> + regulator-always-on;
> + bias-pull-down;
> + };
> +
> + /* mipi_dsi.1-dsi1_pll_vdda */
> + l2 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + bias-pull-down;
> + };
> +
> + /* msm_otg-HSUSB_3p3 */
> + l3 {
> + regulator-min-microvolt = <3075000>;
> + regulator-max-microvolt = <3500000>;
> + bias-pull-down;
> + };
> +
> + /* msm_otg-HSUSB_1p8 */
> + l4 {
> + regulator-always-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + /* msm_sdcc.1-sdc_vdd */
> + l5 {
> + regulator-min-microvolt = <2950000>;
> + regulator-max-microvolt = <2950000>;
> + bias-pull-down;
> + };
> +
> + /* earjack_debug */
> + l6 {
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> + bias-pull-down;
> + };
> +
> + /* mipi_dsi.1-dsi_vci */
> + l8 {
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <3000000>;
> + bias-pull-down;
> + };
> +
> + /* wcnss_wlan.0-iris_vddpa */
> + l10 {
> + regulator-min-microvolt = <2900000>;
> + regulator-max-microvolt = <2900000>;
> + bias-pull-down;
> + };
> +
> + /* mipi_dsi.1-dsi1_avdd */
> + l11 {
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <2850000>;
> + bias-pull-down;
> + };
> +
> + /* touch_vdd */
> + l15 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2950000>;
> + bias-pull-down;
> + };
> +
> + /* slimport_dvdd */
> + l18 {
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1100000>;
> + bias-pull-down;
> + };
> +
> + /* touch_io */
> + l22 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + bias-pull-down;
> + };
> +
> + /*
> + * mipi_dsi.1-dsi_vddio
> + * pil_qdsp6v4.1-pll_vdd
> + * pil_qdsp6v4.2-pll_vdd
> + * msm_ehci_host.0-HSUSB_1p8
> + * msm_ehci_host.1-HSUSB_1p8
> + */
> + l23 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + bias-pull-down;
> + };
> +
> + /*
> + * tabla2x-slim-CDC_VDDA_A_1P2V
> + * tabla2x-slim-VDDD_CDC_D
> + */
> + l24 {
> + regulator-min-microvolt = <750000>;
> + regulator-max-microvolt = <1150000>;
> + bias-pull-down;
> + };
> +
> + l25 {
> + regulator-min-microvolt = <1250000>;
> + regulator-max-microvolt = <1250000>;
> + regulator-always-on;
> + bias-pull-down;
> + };
> +
> + l26 {
> + regulator-min-microvolt = <375000>;
> + regulator-max-microvolt = <1050000>;
> + regulator-always-on;
> + bias-pull-down;
> + };
> +
> + l27 {
> + regulator-min-microvolt = <1100000>;
> + regulator-max-microvolt = <1100000>;
> + };
> +
> + l28 {
> + regulator-min-microvolt = <1050000>;
> + regulator-max-microvolt = <1050000>;
> + bias-pull-down;
> + };
> +
> + /* wcnss_wlan.0-iris_vddio */
> + lvs1 {
> + bias-pull-down;
> + };
> +
> + /* wcnss_wlan.0-iris_vdddig */
> + lvs2 {
> + bias-pull-down;
> + };
> +
> + lvs3 {
> + bias-pull-down;
> + };
> +
> + lvs4 {
> + bias-pull-down;
> + };
> +
> + lvs5 {
> + bias-pull-down;
> + };
> +
> + /* mipi_dsi.1-dsi_iovcc */
> + lvs6 {
> + bias-pull-down;
> + };
> +
> + /*
> + * pil_riva-pll_vdd
> + * lvds.0-lvds_vdda
> + * mipi_dsi.1-dsi1_vddio
> + * hdmi_msm.0-hdmi_vdda
> + */
> + lvs7 {
> + bias-pull-down;
> + };
> +
> + ncp {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + qcom,switch-mode-frequency = <1600000>;
> + };
> + };
> + };
> + };
> +};
> +
> +&pmicintc {
> + keypad@148 {
> + compatible = "qcom,pm8921-keypad";
> + reg = <0x148>;
> + interrupt-parent = <&pmicintc>;
> + interrupts = <74 1>, <75 1>;
IRQ_TYPE_EDGE_RISING
> + linux,keymap = <
> + MATRIX_KEY(0, 0, KEY_VOLUMEDOWN)
> + MATRIX_KEY(0, 1, KEY_VOLUMEUP)
> + >;
> +
> + keypad,num-rows = <1>;
> + keypad,num-columns = <5>;
> + debounce = <15>;
> + scan-delay = <32>;
> + row-hold = <91500>;
> + };
> +};
> +
> +&gsbi1 {
> + status = "okay";
Status should be the last property. Add empty line before it (here and
further)
> + qcom,mode = <GSBI_PROT_I2C>;
> +};
> +
> +&gsbi1_i2c {
> + status = "okay";
> + clock-frequency = <200000>;
> + pinctrl-0 = <&i2c1_pins>;
> + pinctrl-names = "default";
I don't see i2c1_pins being defined. Did it pass the build?
Also there is already a pinctrl for this device. Why do you need to
overwrite it?
> +};
> +
> +&gsbi4 {
> + status = "okay";
> + qcom,mode = <GSBI_PROT_I2C_UART>;
> +};
> +
> +&gsbi4_serial {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&gsbi4_uart_pin_a>;
Unnecessary, can be dropped. It's set in qcom-apq8064.dtsi.
> +};
> +
> +/* eMMC */
> +&sdcc1 {
> + status = "okay";
> + vmmc-supply = <&pm8921_l5>;
> + vqmmc-supply = <&pm8921_s4>;
> +};
> +
> +&riva {
> + status = "okay";
> + pinctrl-names = "default";
> + pinctrl-0 = <&riva_wlan_pin_a>;
Where is it defined? Also pinctrl-names should come after pinctrl-N.
> +};
>
> ---
> base-commit: 0a2f889128969dab41861b6e40111aa03dc57014
> change-id: 20250309-lg-nexus4-mako-da0833885b26
>
> Best regards,
> --
> David Heidelberg <[email protected]>
>
>
--
With best wishes
Dmitry
