> > > +/*
> > > + * Mailbox operations
> > > + */
> > > +int zl3073x_mb_dpll_read(struct zl3073x_dev *zldev, u8 index);
> > > +int zl3073x_mb_dpll_write(struct zl3073x_dev *zldev, u8 index);
> > > +int zl3073x_mb_output_read(struct zl3073x_dev *zldev, u8 index);
> > > +int zl3073x_mb_output_write(struct zl3073x_dev *zldev, u8 index);
> > > +int zl3073x_mb_ref_read(struct zl3073x_dev *zldev, u8 index);
> > > +int zl3073x_mb_ref_write(struct zl3073x_dev *zldev, u8 index);
> > > +int zl3073x_mb_synth_read(struct zl3073x_dev *zldev, u8 index);
> > > +int zl3073x_mb_synth_write(struct zl3073x_dev *zldev, u8 index);
> >
> > I assume these are the only valid ways to access a mailbox?
> >
> > If so:
> >
> > > +static inline __maybe_unused int
> > > +zl3073x_mb_read_ref_mb_mask(struct zl3073x_dev *zldev, u16 *value)
> > > +{
> > > + __be16 temp;
> > > + int rc;
> > > +
> > > + lockdep_assert_held(&zldev->mailbox_lock);
> > > + rc = regmap_bulk_read(zldev->regmap, ZL_REG_REF_MB_MASK, &temp,
> > > + sizeof(temp));
> > > + if (rc)
> > > + return rc;
> > > +
> > > + *value = be16_to_cpu(temp);
> > > + return rc;
> > > +}
> >
> > These helpers can be made local to the core. You can then drop the
> > lockdep_assert_held() from here, since the only way to access them is
> > via the API you defined above, and add the checks in those API
> > functions.
>
> This cannot be done this way... the above API just simplifies the
> operation of read and write latch registers from/to mailbox.
>
> Whole operation is described in the commit description.
>
> E.g. read something about DPLL1
> 1. Call zl3073x_mb_dpll_read(..., 1)
> This selects DPLL1 in the DPLL mailbox and performs read operation
> and waits for finish
> 2. Call zl3073x_mb_read_dpll_mode()
> This reads dpll_mode latch register
>
> write:
> 1. Call zl3073x_mb_write_dpll_mode(...)
> This writes mode to dpll_mode latch register
> 2. Call zl3073x_mb_dpll_read(..., 1)
> This writes all info from latch registers to DPLL1
>
> The point is that between step 1 and 2 nobody else cannot touch
> latch_registers or mailbox select register and op semaphore.
Again, think about your layering. What does your lower level mailbox
API look like? What does the MFD need to export for a safe API?
So maybe you need zl3073x_mb_read_u8(), zl3073x_mb_read_u16(),
zl3073x_mb_read_u32(), as part of your mailbox API. These assert the
lock is held.
You could even make zl3073x_mb_read_u8() validate the register is in
the upper range, and that zl3073x_read_u8() the register is in the
lower range.
Andrew
