Hello Piyush,
few things to improve:
On 22/10/2025 07:40, Piyush Raj Chouhan wrote:
Add initial device tree support for the Xiaomi Redmi K20 Pro/ Xiaomi Mi 9T Pro
(codename raphael), based on the Qualcomm SM8150 (Snapdragon 855)
platform.
The supported features include:
- Display (Samsung AMS639RQ08 AMOLED panel)
- UFS storage
- USB Type-C (with role switching, High-Speed only)
- PMIC regulators (PM8150, PM8150L, PM8150B)
- GPIO keys (volume up, volume down, power)
- Remoteprocs (ADSP, CDSP, MPSS)
- Adreno 640 GPU with GMU
- WCN3990 WiFi
- Camera flash LEDs
Signed-off-by: Piyush Raj Chouhan <[email protected]>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../boot/dts/qcom/sm8150-xiaomi-raphael.dts | 995 ++++++++++++++++++
2 files changed, 996 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sm8150-xiaomi-raphael.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile
b/arch/arm64/boot/dts/qcom/Makefile
index 296688f7cb26..d2b673d2625c 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -279,6 +279,7 @@ dtb-$(CONFIG_ARCH_QCOM) +=
sm8150-microsoft-surface-duo.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-sony-xperia-kumano-bahamut.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-sony-xperia-kumano-griffin.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm8150-xiaomi-raphael.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8250-samsung-r8q.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm8150-xiaomi-raphael.dts
b/arch/arm64/boot/dts/qcom/sm8150-xiaomi-raphael.dts
new file mode 100644
index 000000000000..9ff938b61a31
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8150-xiaomi-raphael.dts
@@ -0,0 +1,995 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/*
+ * Copyright (c) 2025, Piyush Raj Chouhan <[email protected]>.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/arm/qcom,ids.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/usb/pd.h>
+#include "sm8150.dtsi"
+#include "pm8150.dtsi"
+#include "pm8150b.dtsi"
+#include "pm8150l.dtsi"
+
+/*
+ * Rewrite reserved memory maps inherited from sm8150.dtsi to match the ones
+ * used on xiaomi-raphael.
+ * Note: this list is ordered by its memory address in sm8150.dtsi.
+ */
+/delete-node/ &tz_mem; /* same address but larger, no place for
rmtfs_mem! */
+/delete-node/ &rmtfs_mem; /* moved to completely different address */
+/delete-node/ &adsp_mem; /* same start address, but larger size */
+/delete-node/ &mpss_mem; /* same size, shifted higher, due to larger
adsp_mem */
+/delete-node/ &venus_mem; /* same size, shifted higher */
+/delete-node/ &slpi_mem; /* same size, shifted higher */
+/delete-node/ &ipa_fw_mem; /* same size, shifted higher */
+/delete-node/ &ipa_gsi_mem; /* same size, shifted higher */
+/delete-node/ &gpu_mem; /* same size, shifted higher */
+/delete-node/ &spss_mem; /* same size, shifted higher */
+/delete-node/ &cdsp_mem; /* same size, shifted higher */
+
+/ {
+ model = "Xiaomi Redmi K20 Pro";
+ compatible = "xiaomi,raphael", "qcom,sm8150";
+ qcom,msm-id = <QCOM_ID_SM8150 0x20000>; /* SM8150 v2 */
+ qcom,board-id = <0x28008 0>;
+ chassis-type = "handset";
+
+ aliases {
+ serial0 = &uart2;
+ wifi0 = &wifi;
+ };
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ stdout-path = "serial0:115200n8";
+
+ framebuffer: framebuffer@9c000000 {
+ compatible = "simple-framebuffer";
+ reg = <0 0x9c000000 0 (1080 * 2340 * 4)>;
+ width = <1080>;
+ height = <2340>;
+ stride = <(1080 * 4)>;
+ format = "a8r8g8b8";
+ display = <&panel>;
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
+ };
+ };
+
+ disp_vci_vreg: disp-vci-vreg {
+ compatible = "regulator-fixed";
+ regulator-name = "disp_vci_vreg";
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&tlmm 99 GPIO_ACTIVE_HIGH>;
+ };
+
+ vreg_ibb: regulator-ibb {
+ compatible = "regulator-fixed";
+ regulator-name = "ibb";
+ regulator-min-microvolt = <6000000>;
+ regulator-max-microvolt = <6000000>;
+ };
+
+ vreg_lab: regulator-lab {
+ compatible = "regulator-fixed";
+ regulator-name = "lab";
+ regulator-min-microvolt = <6000000>;
+ regulator-max-microvolt = <6000000>;
+ };
+
+ reserved-memory {
+ tz_mem: memory@86200000 {
+ reg = <0x0 0x86200000 0x0 0x5500000>;
+ no-map;
+ };
+
+ adsp_mem: memory@8be00000 {
+ reg = <0x0 0x8be00000 0x0 0x2200000>;
+ no-map;
+ };
+
+ mpss_mem: memory@8e000000 {
+ reg = <0x0 0x8e000000 0x0 0x9600000>;
+ no-map;
+ };
+
+ venus_mem: memory@97600000 {
+ reg = <0x0 0x97600000 0x0 0x500000>;
+ no-map;
+ };
+
+ slpi_mem: memory@97b00000 {
+ reg = <0x0 0x97b00000 0x0 0x1400000>;
+ no-map;
+ };
+
+ ipa_fw_mem: memory@98f00000 {
+ reg = <0x0 0x98f00000 0x0 0x10000>;
+ no-map;
+ };
+
+ ipa_gsi_mem: memory@98f10000 {
+ reg = <0x0 0x98f10000 0x0 0x5000>;
+ no-map;
+ };
+
+ gpu_mem: memory@98f15000 {
+ reg = <0x0 0x98f15000 0x0 0x2000>;
+ no-map;
+ };
+
+ spss_mem: memory@99000000 {
+ reg = <0x0 0x99000000 0x0 0x100000>;
+ no-map;
+ };
+
+ cdsp_mem: memory@99100000 {
+ reg = <0x0 0x99100000 0x0 0x1400000>;
+ no-map;
+ };
+
+ cont_splash_mem: memory@9c000000 {
+ reg = <0x0 0x9c000000 0x0 0x2400000>;
+ no-map;
+ };
+
+ cdsp_sec_mem: memory@a4c00000 {
+ reg = <0x0 0xa4c00000 0x0 0x3c00000>;
+ no-map;
+ };
+
+ ramoops@a1600000 {
+ compatible = "ramoops";
+ reg = <0x0 0xa1600000 0x0 0x800000>;
+ console-size = <0x400000>;
+ pmsg-size = <0x200000>;
+ record-size = <0>;
+ ftrace-size = <0>;
+ ecc-size = <0>;
+ no-map;
+ };
+
+ rmtfs_mem: memory@fe101000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0 0xfe101000 0 0x300000>;
+ qcom,client-id = <1>;
+ qcom,vmid = <15>;
s/15/QCOM_SCM_VMID_MSS_MSA/
+ no-map;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&vol_up_n>;
+
+ key-vol-up {
+ label = "Volume Up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&pm8150_gpios 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ };
+
+ /*
+ * Apparently RPMh does not provide support for PM8150 S4 because it
+ * is always-on; model it as a fixed regulator.
+ */
+ vreg_s4a_1p8: pm8150-s4 {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s4a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ vin-supply = <&vph_pwr>;
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm8150-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+
+ vdd-l1-l8-l11-supply = <&vreg_s6a_0p9>;
+ vdd-l2-l10-supply = <&vreg_bob>;
+ vdd-l3-l4-l5-l18-supply = <&vreg_s6a_0p9>;
+ vdd-l6-l9-supply = <&vreg_s8c_1p3>;
+ vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p0>;
+ vdd-l13-l16-l17-supply = <&vreg_bob>;
+
+ vreg_s5a_2p0: smps5 {
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2000000>;
+ };
+
+ vreg_s6a_0p9: smps6 {
+ regulator-min-microvolt = <920000>;
+ regulator-max-microvolt = <1128000>;
+ };
+
+ vdda_wcss_pll:
+ vreg_l1a_0p75: ldo1 {
+ regulator-min-microvolt = <752000>;
+ regulator-max-microvolt = <752000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_pdphy:
+ vdda_usb_hs_3p1:
+ vreg_l2a_3p1: ldo2 {
+ regulator-min-microvolt = <3072000>;
+ regulator-max-microvolt = <3072000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3a_0p8: ldo3 {
+ regulator-min-microvolt = <480000>;
+ regulator-max-microvolt = <932000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /*
+ * L4A supplies VDD_LPI_MX_* (VDD_LPI_MX_A_1). Board label:
vreg_l4a_0p75.
+ * PM8150 device spec: L4A nominal = 0.816 V, active min =
0.752 V, active max = 0.904 V,
+ * IRATED = 300 mA. If the board programs L4A to ~0.752 V, keep
min=752000 and max=816000.
+ */
+ vreg_l4a_0p75: ldo4 {
+ regulator-min-microvolt = <752000>;
+ regulator-max-microvolt = <816000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_usb_hs_core:
+ vdda_mipi_csi_0_0p9:
+ vdda_mipi_csi_1_0p9:
+ vdda_mipi_csi_2_0p9:
+ vdda_mipi_csi_3_0p9:
+ vdda_mipi_dsi_0_0p9:
+ vdda_mipi_dsi_1_0p9:
+ vdda_mipi_dsi_0_pll_0p9:
+ vdda_mipi_dsi_1_pll_0p9:
+ vdda_pcie_1ln_core:
+ vdda_pcie_2ln_core:
+ vdda_pll_hv_cc_ebi01:
+ vdda_pll_hv_cc_ebi23:
+ vdda_qrefs_0p875_5:
+ vdda_sp_sensor:
+ vdda_ufs_2ln_core_1:
+ vdda_ufs_2ln_core_2:
+ vdda_qlink_lv:
+ vdda_qlink_lv_ck:
+ vreg_l5a_0p875: ldo5 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6a_1p2: ldo6 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7a_1p8: ldo7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ /*
+ * PM8150 LDO8 (L8A) — supplies vreg_l8a_0p75
+ * Device spec: nominal 0.752 V, active min 0.752 V, active max
0.904 V, IRATED = 300 mA
+ */
+ vreg_l8a_0p75: ldo8 {
+ regulator-min-microvolt = <752000>;
+ regulator-max-microvolt = <816000>;
+ };
+
+ vddpx_10:
+ vreg_l9a_1p2: ldo9 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10a_2p95: ldo10 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11a_0p8: ldo11 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_qfprom:
+ vdd_qfprom_sp:
+ vdda_apc_cs_1p8:
+ vdda_gfx_cs_1p8:
+ vdda_usb_hs_1p8:
+ vdda_qrefs_vref_1p8:
+ vddpx_10_a:
+ vreg_l12a_1p8: ldo12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13a_2p7: ldo13 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2704000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14a_1p8: ldo14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15a_1p7: ldo15 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <1704000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16a_2p7: ldo16 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17a_3p0: ldo17 {
+ regulator-min-microvolt = <2856000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l18a_1p05: ldo18 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8150l-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+
+ vdd-l1-l8-supply = <&vreg_s4a_1p8>;
+ vdd-l2-l3-supply = <&vreg_s8c_1p3>;
+ vdd-l4-l5-l6-supply = <&vreg_bob>;
+ vdd-l7-l11-supply = <&vreg_bob>;
+ vdd-l9-l10-supply = <&vreg_bob>;
+
+ vdd-bob-supply = <&vph_pwr>;
+ vdd-flash-supply = <&vreg_bob>;
+ vdd-rgb-supply = <&vreg_bob>;
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <4000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ regulator-allow-bypass;
+ };
+
+ vreg_s8c_1p3: smps8 {
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ };
+
+ vreg_l1c_1p8: ldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_wcss_adcdac_1:
+ vdda_wcss_adcdac_22:
+ vreg_l2c_1p3: ldo2 {
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_hv_ebi0:
+ vdda_hv_ebi1:
+ vdda_hv_ebi2:
+ vdda_hv_ebi3:
+ vdda_hv_refgen0:
+ vdda_mipi_dsi0_1p2:
+ vdda_qlink_hv_ck:
+ vreg_l3c_1p2: ldo3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_5:
+ vreg_l4c_1p8: ldo4 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_6:
+ vreg_l5c_1p8: ldo5 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_2:
+ vreg_l6c_2p9: ldo6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7c_3p0: ldo7 {
+ regulator-min-microvolt = <2856000>;
+ regulator-max-microvolt = <3104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8c_1p8: ldo8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9c_2p9: ldo9 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10c_3p3: ldo10 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11c_3p3: ldo11 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&gmu {
+ status = "okay";
+};
+
+&gpi_dma2 {
+ status = "okay";
+};
+
+&gpu {
+ zap-shader {
+ memory-region = <&gpu_mem>;
+ firmware-name = "qcom/sm8150/xiaomi/raphael/a640_zap.mbn";
The vendor should start with upper case, so Xiaomi here (and everywhere
else)
+ };
+
+ status = "okay";
+};
+
+&i2c19 {
+ /* goodix,gt9886 @5d */
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dsi0 {
+ vdda-supply = <&vdda_mipi_dsi0_1p2>;
+
+ status = "okay";
+ panel: panel@0 {
+ compatible = "samsung,ams639rq08";
+ reg = <0>;
+
+ vddio-supply = <&vreg_l14a_1p8>;
+ vdd3p3-supply = <&disp_vci_vreg>;
+ vsn-supply = <&vreg_ibb>;
+ vsp-supply = <&vreg_lab>;
+
+ reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+ pinctrl-names = "default", "sleep";
pinctrl-names should come after pinctrl-N
+ pinctrl-0 = <&panel_reset_pin &panel_te_pin>;
you're missing the pinctrl-1 for the "sleep"
+
+ status = "okay";
missing newline
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&mdss_dsi0_out>;
+ };
+ };
+ };
+};
+
+&mdss_dsi0_out {
+ data-lanes = <0 1 2 3>;
+ remote-endpoint = <&panel_in>;
+};
+
+&mdss_dsi0_phy {
+ vdds-supply = <&vreg_l5a_0p875>;
+
+ status = "okay";
+};
+
+&pm8150_gpios {
+ vol_up_n: vol-up-n-state {
+ pins = "gpio6";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ input-enable;
+ bias-pull-up;
+ };
+};
+
+&pm8150b_typec {
+ vdd-vbus-supply = <&pm8150b_vbus>;
+ vdd-pdphy-supply = <&vdda_usb_hs_3p1>;
+
+ status = "okay";
newline
+ connector {
+ compatible = "usb-c-connector";
+ power-role = "source";
+ data-role = "dual";
+ self-powered;
+
+ source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_DUAL_ROLE |
+ PDO_FIXED_USB_COMM |
PDO_FIXED_DATA_SWAP)>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pm8150b_hs_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_hs>;
+ };
+ };
+ };
+ };
+};
+
+&pm8150b_vbus {
+ regulator-min-microamp = <500000>;
+ regulator-max-microamp = <3000000>;
+
+ status = "okay";
+};
+
+&pm8150l_flash {
+
+ status = "okay";
newline
+ led-1 {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ led-sources = <1>;
+ led-max-microamp = <150000>;
+ flash-max-microamp = <1000000>;
+ flash-max-timeout-us = <1280000>;
+ };
+
+ led-2 {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_YELLOW>;
+ led-sources = <2>;
+ led-max-microamp = <150000>;
+ flash-max-microamp = <1000000>;
+ flash-max-timeout-us = <1280000>;
+ };
+};
+
+&pm8150l_lpg {
+
+ status = "okay";
newline
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_WHITE>;
+ function = LED_FUNCTION_STATUS;
+
+ status = "disabled";
+ };
+
+ led@2 {
+ reg = <2>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <0>;
+ };
+
+ led@3 {
+ reg = <3>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_STATUS;
+ function-enumerator = <1>;
+ };
+};
+
+&pm8150l_wled {
+ qcom,num-strings = <3>;
+ qcom,cabc;
+ qcom,cabc-sel = <1>;
+};
+
+&pon {
+ mode-bootloader = <0x2>;
+ mode-recovery = <0x1>;
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&qupv3_id_2 {
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/sm8150/xiaomi/raphael/adsp.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/sm8150/xiaomi/raphael/cdsp.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_mpss {
+ firmware-name = "qcom/sm8150/xiaomi/raphael/modem.mbn";
+
+ status = "okay";
+};
+
+&remoteproc_slpi {
+ firmware-name = "qcom/sm8150/xiaomi/raphael/slpi.mbn";
+
+ status = "disabled";
+};
