On Fri, 16 Jan 2026 16:54:42 +0100, Barnabás Czémán wrote: > Redmi Note 8 and 8T are sibling devices the only difference > is Redmi Note 8T have NFC. > This patch series is commonizing Redmi Note 8 devicetree > for a base for both devices. > > The patch series also contains some fixes for Redmi Note 8: > - Fix reserved memory ranges, they were wrongly defined. > - Remove board-id, board-id is not neccessary for the bootloader. > - Fix reserved-gpio-ranges the reserved ranges was wrongly > defined what caused the device crash on the boot. > - Remove unnecessary usb-extcon, gpio102 is related to DisplayPort > what is not supported by these devices. > - Use memory-region property for framebuffer. > > Depends on: > [1] > https://lore.kernel.org/all/[email protected]/ > > Signed-off-by: Barnabás Czémán <[email protected]> > --- > Changes in v2: > - Fix copyright in sm6125-xiaomi-ginkgo.dts as requested. > - Use memory-region property for the framebuffer. > - Add comment about the NFC. > - Remove msm-id change in favor of [1]. > - Link to v1: > https://lore.kernel.org/r/[email protected] > > --- > Barnabás Czémán (7): > arm64: dts: qcom: sm6125-xiaomi-ginkgo: Remove board-id > arm64: dts: qcom: sm6125-xiaomi-ginkgo: Correct reserved memory ranges > arm64: dts: qcom: sm6125-xiaomi-ginkgo: Set memory-region for > framebuffer > arm64: dts: qcom: sm6125-xiaomi-ginkgo: Remove extcon > arm64: dts: qcom: sm6125-xiaomi-ginkgo: Fix reserved gpio ranges > dt-bindings: arm: qcom: Add Xiaomi Redmi Note 8T > arm64: dts: qcom: Add Redmi Note 8T > > Documentation/devicetree/bindings/arm/qcom.yaml | 1 + > arch/arm64/boot/dts/qcom/Makefile | 3 +- > .../boot/dts/qcom/sm6125-xiaomi-ginkgo-common.dtsi | 301 > +++++++++++++++++++++ > arch/arm64/boot/dts/qcom/sm6125-xiaomi-ginkgo.dts | 285 +------------------ > arch/arm64/boot/dts/qcom/sm6125-xiaomi-willow.dts | 15 + > 5 files changed, 320 insertions(+), 285 deletions(-) > --- > base-commit: f417b7ffcbef7d76b0d8860518f50dae0e7e5eda > change-id: 20260111-xiaomi-willow-448552f02762 > prerequisite-message-id: > <[email protected]> > prerequisite-patch-id: 1bc49c0e2bec1a47667df776e1ab265b0699ea35 > > Best regards, > -- > Barnabás Czémán <[email protected]> > > >
My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade This patch series was applied (using b4) to base: Deps: looking for dependencies matching 1 patch-ids Deps: Applying prerequisite patch: [PATCH RFT] arm64: dts: qcom: sm6125-ginkgo: Fix missing msm-id subtype Base: f417b7ffcbef7d76b0d8860518f50dae0e7e5eda (use --merge-base to override) If this is not the correct base, please add 'base-commit' tag (or use b4 which does this automatically) Warnings in base: 266 Warnings after series: 272 New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/qcom/' for [email protected]: arch/arm64/boot/dts/qcom/sm6125-xiaomi-willow.dtb: geniqup@4ac0000 (qcom,geni-se-qup): #address-cells: 2 was expected from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml arch/arm64/boot/dts/qcom/sm6125-xiaomi-willow.dtb: geniqup@4ac0000 (qcom,geni-se-qup): #size-cells: 2 was expected from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml arch/arm64/boot/dts/qcom/sm6125-xiaomi-willow.dtb: geniqup@4cc0000 (qcom,geni-se-qup): #address-cells: 2 was expected from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml arch/arm64/boot/dts/qcom/sm6125-xiaomi-willow.dtb: geniqup@4cc0000 (qcom,geni-se-qup): #size-cells: 2 was expected from schema $id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml
