Linux-Hardware Digest #986, Volume #10 Wed, 11 Aug 99 17:13:41 EDT
Contents:
D-Link DE-528CT Ethernet driver (Jesse Hughes)
NE2000 PCI installation problems... (Konstantin Gonikman)
Re: LS120 Woes (Hugh McCurdy)
Re: HP LaserJet 1100 (Billy Donahue)
Re: PS39 Camera support for Linux? (Erik)
100BaseTX NIC recommendations? (Breen Ouellette)
Re: aic7xxx detects harddisk but not linux (Billy Donahue)
Re: Audio problems with AVerMedia TVCapture98 (Jaume =?iso-8859-1?Q?Gran=E9?= Mora)
Re: linux moden interno (Billy Donahue)
Re: More memory greater speed?? (Scott Marlowe)
Re: monitor video timings (David C.)
Re: Can aha152x module be used as a second scsi controller, i.e. scsi1 (Alex Yung)
Can 16450 UART prevent comm. w/ext. modem? (brett russ)
Is/Will Linux well support these? (leon)
Re: HP LaserJet 1100 (J. Scott Berg)
SuSE: 44x CDROM intermittent mounting problems ([EMAIL PROTECTED])
Re: For Sale : Intel P120 PC + Canon Printer (Sprint)
Re: Support PCMCIA cards? (bad_knee)
Terminal Server Ports - RH5.2 ("Richard")
SE440BX-2 and sound (Brian)
Re: half speed wav files? (Billy Donahue)
Re: 100BaseTX NIC recommendations? (Jeff McWilliams)
----------------------------------------------------------------------------
From: Jesse Hughes <[EMAIL PROTECTED]>
Subject: D-Link DE-528CT Ethernet driver
Date: Wed, 11 Aug 1999 11:05:02 -0400
Hey ho.
What driver should I choose for this card? I looked at the D-Link site,
and they had a driver for Linux 1.2.13, but I'm running 2.2.10. That, and
I couldn't easily install it without first downloading a DOS diskette
(bleh) and extracting it, as far as I could tell. With some effort, I
could do this. However, I was hoping that one of the existing drivers for
2.2.10 might work for this card.
Has anyone else gotten this card to work on a Linux 2.2 or 2.0 kernel?
Please send a courtesy copy of any replies, as my access to the newsgroups
is temporarily difficult.
Jesse
------------------------------
From: Konstantin Gonikman <[EMAIL PROTECTED]>
Crossposted-To: alt.comp.periphs.videocards.elsa,comp.os.linux.networking
Subject: NE2000 PCI installation problems...
Date: Wed, 11 Aug 1999 00:08:25 +0200
Hi,
I have a problem to install my PCI net-card. It has a 89c940 chip (i think it's
NE2000-compatible).
My Kernel says:
=========
ne2k-pci.c:v0.99L 2/7/98 D. Becker/P. Gortmaker
http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html
WARNING: The PCI BIOS assigned this PCI NE2k card to IRQ 0, which is unlikely to
work!.
You should use the PCI BIOS setup to assign a valid IRQ line.
ne2k-pci.c: PCI NE2000 clone 'Winbond 89C940' at I/O 0xb800, IRQ 0.
eth0: PCI NE2000 found at 0xb800, IRQ 0, 00:00:E8:59:C7:06.
=========
Should I change the IRQ for this card in the BIOS? But how?
Can you help me please?
Thanks,
Konstantin
--
================================================================
"All I want is my God-given right to 95% of the browser market."
James Barksdale, Netscape’s chief executive
------------------------------
From: Hugh McCurdy <[EMAIL PROTECTED]>
Subject: Re: LS120 Woes
Date: Wed, 11 Aug 1999 16:15:23 +0000
Wayne Bradney wrote:
>
> I'm about to junk my LS120 unless I can get it working soon.
>
> It's always been flaky on my Windows machine, so I've decided to give it to
> my Linux box instead. Hooks up fine, BIOS recognises the drive, my kernel
> supports ATAPI floppy drives, Linux slots it in at /dev/hdb. No problems so
> far.
>
> Now I can't make a boot disk out of a 1.44 floppy.
>
> dd if=boot.img of=/dev/hdb bs=1440
>
> just gets me:
>
> hdb: unknown partition table
> dd: /dev/hdb: No space left on device
> 1025+0 records in
> 1024+0 records out
>
> The boot.img file is straight from the Redhat CD.
>
> Is there anything else I should be doing to get this thing working like a
> floppy?
>
I do not have my LS120 setup for booting (I also have a std floppy
drive).
But I am able to try your test.
dd if=boot.img of=/dev/hdc bs=1440
1024+0 records in
1024+0 records out
I am using RH 6.0 updated to the 2.2.10 kernel.
If you are using the 2.0.34 kernel, perhaps you should update to 2.0.35
or later.
Have you tried a different floppy diskette?
Does the drive work with LS-120 media?
And finally, as you said, it was flaky under Windows. It could simply
be a broken drive.
--
Hugh McCurdy
------------------------------
From: Billy Donahue <[EMAIL PROTECTED]>
Subject: Re: HP LaserJet 1100
Date: Wed, 11 Aug 1999 14:14:31 -0400
Evan DiBiase wrote:
>
> Hi,
>
> I am a high school student who needs to find a good printer for printing
> out papers, reports, etc. For this reason, I think that a laser printer would
> be a good choice for me. I was told to check out the LaserJets from HP, but
> only found one series that was within my budget of $400 -- the LaserJet 1100.
> Is this a good printer for use with Debian/GNU Linux, and a good printer in
> general? Or is there a better printer in the same price range that works with
> Linux too? I haven't shopped for a printer in a long time, so I'm pretty
> clueless and any help would be appreciated.
Good plan..
Deskjet printers are sloppy.. It was a happy day when I replaced
my Deskjet with a HP1100..
Just pretend its a Laserjet 4 and you should be fine.
------------------------------
From: [EMAIL PROTECTED] (Erik)
Subject: Re: PS39 Camera support for Linux?
Date: Wed, 11 Aug 1999 18:12:42 GMT
On Mon, 09 Aug 1999 16:45:41 GMT, hubert uhlrich
<[EMAIL PROTECTED]> wrote:
>Did you try photopc and it's front end gphoto?? Works for most cams=20
>with serial communication.
the cam I use is a printer port cam, which (for power) has to be
connected to ps/2 or keyboard-connector.......
but I'll give it a try anyways!
thanks!
Erik
------------------------------
From: Breen Ouellette <[EMAIL PROTECTED]>
Subject: 100BaseTX NIC recommendations?
Date: Wed, 11 Aug 1999 10:15:39 -0600
Hi,
Does anyone out there have a recommendation for which 100BaseTX NICs
work well with Linux? I plan to migrate part of my network from
10BaseT.
-Breen
------------------------------
From: Billy Donahue <[EMAIL PROTECTED]>
Subject: Re: aic7xxx detects harddisk but not linux
Date: Wed, 11 Aug 1999 14:17:45 -0400
Shmitty wrote:
>
> hello,
>
> i've one hd (quantum fireball st3.2s) on my system controlled by adaptec
> 2940, scsi-id 0, lun 0, controller scsi-id 7
>
> this device is detected by the scsi-controller but not during linux boot
> (suse 6.1, kernel 2.2.5, aic7xxx version 5.1.11)
>
> this device is detected by all m$-os (dos win ...) but not with linux
>
> any idea??
I think I need more info to help you...
Try to get a log of the scsi initialization messages from
bootup. 'dmesg' might help.
Is your SCSI (aic7xxx.o) built into the kernel, or a module?
So you have SCSI disk support enabled or insmod'ed?
------------------------------
From: Jaume =?iso-8859-1?Q?Gran=E9?= Mora <[EMAIL PROTECTED]>
Subject: Re: Audio problems with AVerMedia TVCapture98
Date: Wed, 11 Aug 1999 00:10:13 +0200
"R.K.Aa" wrote:
> =
> Jaume Gran=E9 Mora wrote:
> >
> > I can't hear the audio with my AVerMedia TVCapture98. I'm using a 2.2=
=2E10
> > kernel, the latest bbtv drivers I found (0.6.4e) and XawTV 2.46. It's=
> > not the line-in of my SoundBlaster, I'm sure.
> >
> > Any idea? Does anybody succeeded in that question? Help!
> =
> The way i fixed the sound-riddle in xawtv was to insert "mixer" as
> mixer-device in the .xawtv init file. That forced an error, listing the=
> possible sound devices. After that i just tested them one by one - till=
> i had found the right device.
> =
> ("mixer =3D mixer" to force the error, and "mixer =3D vol" worked in my=
case
> - may be different in yours.)
> =
> K.
> =
> --
> Step by step guide to TrueType fonts under RedHat6:
> http://home.powertech.no/rkaa/Linux_and_tv.html#ttf
> To E-mail, delete "spam"
Bad luck... Still no audio.
I found this line in /var/log/messages:
=2E..
Aug 11 00:04:50 espit kernel: i2c: initialized =
Aug 11 00:04:58 espit kernel: Linux video capture interface: v1.00 =
Aug 11 00:04:58 espit kernel: bttv0: Brooktree Bt878 (rev 2) bus: 0,
devfn: 80, irq: 9, memory: 0xe6000000. =
Aug 11 00:04:58 espit kernel: PCI: Enabling bus mastering for device
00:50 =
Aug 11 00:04:58 espit kernel: bttv: 1 Bt8xx card(s) found. =
Aug 11 00:04:58 espit kernel: bttv0: NO fader chip: TEA6300 =
Aug 11 00:04:58 espit kernel: bttv0: model: BT878(AVerMedia TVCapture
98) =
Aug 11 00:05:21 espit kernel: bttv0: PLL: 28636363 =3D> 35468950 ... ok =
=2E..
Any suggestion??
Jaume.
------------------------------
From: Billy Donahue <[EMAIL PROTECTED]>
Subject: Re: linux moden interno
Date: Wed, 11 Aug 1999 14:20:25 -0400
juan wrote:
>
> como se configura un moden interno tengo redhat 6.0 y gnome 1.0
Escribe en ingles por favor.
Si su modem es una Winmodem, usted esta en una mar de mierda.
:)
------------------------------
From: Scott Marlowe <[EMAIL PROTECTED]>
Subject: Re: More memory greater speed??
Date: Wed, 11 Aug 1999 10:42:25 -0600
Lucas Tibbits wrote:
> I started w/ 64MB on my PII400. The jump to 192MB blew me away. Since
> then I jumped up to 320MB when RAM prices were low. I'm almost sorry
> since I got almost no performance boost. The only benefits are when I'm
> reading/writing very large files. I work w/ large CD-quality .wav files
> upwards of 80MB and this is the only time I notice the last upgrade.
>
> When looking at 'free' or 'top' I don't think I've ever seen memory usage
> above 256MB. The last 64 megs are virtually unused. Like said earlier,
> your biggest performance increase comes when you stop using the swap
> file. On my machine it happened somewhere between 64 and 192MB of memory...
The sweet spot for me was 128 Meg. I have 25Megs ni buffers typically, and another
5 meg free. I'd bet 96 Meg would be almost as good as 128, but I don't want to use
both memroy slots on my puny motherboard, so I just bought a single 128 Meg stick.
------------------------------
From: [EMAIL PROTECTED] (David C.)
Crossposted-To: comp.os.linux.setup
Subject: Re: monitor video timings
Date: 11 Aug 1999 14:13:32 -0400
Alex Arana <[EMAIL PROTECTED]> writes:
>
> Thanks for your response. The trouble I'm having setting up my
> monitor is that the screen is schrunk in the middle stretching out as
> it goes to the top and bottom to resemble roughly something like ) (
This is pincushioning. Tweaking the size/position values in X's mode
lines can sometimes help. Most monitors have a control to compensate.
I'd just use it and be rid of the problem.
> It would be nice to be able to run 1024x768 @ 85Hz as I do in NT but
> that is proving more and more elusive and the weeks go by...
What makes you think NT is really running it at 85Hz? Depending on the
card, the driver, and whatever monitor capabilities NT can detect, you
may be getting something completely different.
For instance, on a Win95 box, I can set a Diamond Stealth 3D-2000 card
to 1280x1024x16 @ 72Hz. And Windows claims that's what it's giving.
But when I check the actual frequency (the monitor has a setup screen
where I can view that), I find that the card is actually generating an
87Hz interlaced signal.
XFree86, on the other hand, properly determined that this resolution/
color/refresh requires a dot-clock beyond the chipset's capabilities
and set itself to 60Hz, which worked.
In other words, Microsoft operating systems are known to lie when
queried about hardware settings. I wouldn't trust them.
-- David
------------------------------
From: [EMAIL PROTECTED] (Alex Yung)
Subject: Re: Can aha152x module be used as a second scsi controller, i.e. scsi1
Date: 11 Aug 1999 17:48:11 GMT
Reply-To: [EMAIL PROTECTED]
Walter B Kulecz, PhD (killspam@wkulecz$pam$uck$.bigfoot.com) wrote:
: Scsi0 is Ncr53C8xx and works perfectly. I've failed at this under
: both Redhat 5.2 and 6.0
: Trying to insmod the aha152x driver for the attached SCSI port on an
: old non PnP Soundblaster/16 all I can get is "resource in use" error
: or the insmod command hangs until I hit Ctrl-C.
: I've changed the jumpers and tried all combinations of IO 0x340 &
: 0x140 and irq 11 & 12 There are no conflicts. Irq 10 & 9 are scsi0
: and ethernet. VGA irq is disabled in the BIOS.
: I put it in a win95 box and verified the scsi port is OK, worked fine
: at the default settings of 0x140 and irq 12.
: Anyone know the trick?
: --wally.
If you want it to be scsi1, you have to make sure that your current
Ncr53C8xx has a lower I/O addr. I have mine working with the
Adaptec 1540B. I cannot use 0x140 because it will make it scsi0.
So I chose 0x340 now.
------------------------------
From: [EMAIL PROTECTED] (brett russ)
Subject: Can 16450 UART prevent comm. w/ext. modem?
Date: 11 Aug 1999 18:35:18 GMT
I am trying to connect an external USR 56K sportster and am confident
that there are no address and interrupt conflicts but I am still
unable to communicate with it. I have an old PC w/16450 UARTs...could
this prevent me from being able to issue a simple AT cmd? I am seeing
ints from the modem when I run kermit and try to talk to it. I do not
see any text or response from the modem though.
I have no problems getting my internal 14.4 working...that has its own
16550A UART. I would have thought that the slow UARTs would only pose
a problem when running a high speeds. I've tried setting the speed in
kermit to as low as 9600 and the serial port speed as low as 1200.
Before I go out and buy a new IO card w/fast UARTs, I want to know
that this problem may be caused by the UART. I can run a mouse off
the serial port w/o problems so it's not totally useless.
------------------------------
From: [EMAIL PROTECTED] (leon)
Subject: Is/Will Linux well support these?
Date: Wed, 11 Aug 1999 18:16:18 GMT
Detect CPU temperature/Fan Speed(Winbond,etc.) & FSB
AMR(Audio Modem Riser) Slot
USB
CD-R/RW & DVD-R/RW
Software decoding DVD video
IEEE 1394 Firewire
Device Bay
and many ......
------------------------------
From: [EMAIL PROTECTED] (J. Scott Berg)
Subject: Re: HP LaserJet 1100
Date: 11 Aug 1999 18:32:44 GMT
In article <[EMAIL PROTECTED]>,
Evan DiBiase <[EMAIL PROTECTED]> wrote:
> I am a high school student who needs to find a good printer
>for printing out papers, reports, etc. For this reason, I think that
>a laser printer would be a good choice for me. I was told to check
>out the LaserJets from HP, but only found one series that was within
>my budget of $400 -- the LaserJet 1100. Is this a good printer for
>use with Debian/GNU Linux, and a good printer in general? Or is there
>a better printer in the same price range that works with Linux too? I
>haven't shopped for a printer in a long time, so I'm pretty clueless
>and any help would be appreciated.
Works fine with the ljet4 device in Ghostscript. You'll have to
figure out what if any printer setup stuff Debian has. Using LPRng
(not a Debian system), here's how I set it up:
/etc/printcap:
lp-ljet4
:if=/usr/local/sbin/lprng-if.sh
:lp=/dev/lp0
:qq
:sf
:sh
/etc/lpd.conf:
filter_options=$-Q
/usr/local/sbin/lprng-if.sh:
#!/bin/sh -
case "$1"
in
lp-ljet4)
driver=ljet4;;
*)
echo Invalid queue "$1" 1>&2
exit 3;;
esac
gs -q -dBATCH -dSAFER -dNOPAUSE -sDEVICE=$driver -sOutputFile=- -
------------------------------
From: [EMAIL PROTECTED]
Subject: SuSE: 44x CDROM intermittent mounting problems
Date: Wed, 11 Aug 1999 18:32:39 GMT
SuSE 6.1 distribution. Can only mount CDROM disk 1 and 2, but cannot
mount disk 3, 4, & 5. Have been able to mount disk 3 two times and disk
4 once, but after a short time the system errors. I have exchanged the
distribution in case the disks were bad, but had the same errors. I have
tried manual mounting as well. And I tried moving the CDROM drive from
ide0 (slave) to ide1 (master) with the same results. I have also mounted
various disks from other operating systems without any problems.
Questions: Is this a hardware problem? If so why can I mount disk 1 & 2
and other OS disks. Is there a command or configuration or boot
paramater I can invoke to cause the drive to work? (make it slower???)
Thank you for your help.
Hardware Information:
VIAgra PM585 MVP4 chipset motherboard with AMD K6-2 350MHz processor
64 MB RAM
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
hda: SAMSUNG SV0844A, ATA DISK drive
hdb: ATAPI CD ROM VER 5.1, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: SAMSUNG SV0844A, 8063MB w/482kB Cache, CHS=1027/255/63
hdb: ATAPI 44X CD-ROM drive, 128kB Cache
Various Error Messages:
***from dmesg when SuSE Disk 3 in CDROM drive on system startup:
cdrom: open failed.
VFS: Disk change detected on device ide0(3,64)
***from /var/logs/message when attempting to manually mount SuSE disk 3
Aug 10 06:16:23 peace kernel: VFS: Disk change detected on device
ide0(3,64)
Aug 10 06:16:23 peace kernel: hdb: tray open
Aug 10 06:16:23 peace kernel: end_request: I/O error, dev 03:40 (hdb),
sector 2
Aug 10 06:16:23 peace kernel: cdrom: open failed.
Aug 10 06:16:23 peace kernel: VFS: Disk change detected on device
ide0(3,64)
Aug 10 06:16:23 peace kernel: cdrom: open failed.
***from /var/logs/message when SuSE disk 3 mounted, then died after a
few accesses:
Aug 10 06:33:34 peace kernel: VFS: Disk change detected on device
ide0(3,64)
Aug 10 06:33:36 peace kernel: ISO 9660 Extensions: RRIP_1991A
Aug 10 06:39:09 peace kernel: hdb: DSC timeout
Aug 10 06:39:19 peace kernel: hdb: irq timeout: status=0xd1 { Busy }
Aug 10 06:39:19 peace kernel: hdb: ATAPI reset complete
Aug 10 06:39:29 peace login[121]: ROOT LOGIN on `tty2'
Aug 10 06:39:29 peace kernel: hdb: irq timeout: status=0xc0 { Busy }
Aug 10 06:39:29 peace kernel: hdb: ATAPI reset complete
Aug 10 06:39:40 peace kernel: hdb: irq timeout: status=0xc0 { Busy }
Aug 10 06:39:40 peace kernel: end_request: I/O error, dev 03:40 (hdb),
sector 1329168
Aug 10 06:39:40 peace kernel: hdb: status timeout: status=0xc0 { Busy }
Aug 10 06:39:40 peace kernel: hdb: drive not ready for command
Sent via Deja.com http://www.deja.com/
Share what you know. Learn what you don't.
------------------------------
From: [EMAIL PROTECTED] (Sprint)
Crossposted-To: comp.sys.ibm.pc.hardware.systems,comp.sys.ibm.pc.hardware.misc
Subject: Re: For Sale : Intel P120 PC + Canon Printer
Date: Wed, 11 Aug 1999 20:16:21 GMT
Sound, speakers, modem? For $400 you can buy a new pc these days.
On 10 Aug 1999 23:07:49 GMT, [EMAIL PROTECTED] (Microserf) wrote:
>I would like to sell the following PC
>
>Intel Pentium - 120
>EDO 8MB RAM
>1.2 GB IDE HD
>3.5" HD Floppy
>PCI Accelerated Video Card (1 MB VRAM)
>CD-ROM
>15" Monitor
>Canon BubbleJet Printer 250.
>
>Asking : $400 + Shipping.
>Prefer buyers in the San Diego Area.
>
>sb
>
>
>
>
>
>
>
>
There's some entertainment value in watching people juggle nitroglycerin.
-- Larry Wall in <[EMAIL PROTECTED]>
------------------------------
From: bad_knee <[EMAIL PROTECTED]>
Subject: Re: Support PCMCIA cards?
Date: Wed, 11 Aug 1999 00:05:26 +0000
jay wrote:
>
> Getting a laptop in a week or so, and purposely ordered
> it without a network card or a modem (winmodem, and unsupported
> network card were included).
> What are some good modem and ethernet pc-cards that are
> compatible with linux? I believe that the netgear 410tx will work,
> but I have no idea about which modem to choose.
> Thanks for any help.
try the hardware-howto. I was going to get a Linksys pcmcia nic
a while back.
------------------------------
From: "Richard" <[EMAIL PROTECTED]>
Subject: Terminal Server Ports - RH5.2
Date: Wed, 11 Aug 1999 11:12:20 -0700
I need to connect about 60 printers which are scattered around on misc.
terminal / print servers, such as Bay Networks devices, HP JetDirect cards,
etc.
I know that I can spool these printers via /etc/printcap, but I would like
to know if I can connect them as /dev files? I am able to do this on a Data
General system using a card called a VTC (Virtual Terminal Controller). Does
anyone know of a similar method for Linux? Either a hardware or software
solution would be welcome.
The reason is that we have legacy software which is written in such a way
that spooled printing can't be used - only directly connected devices. I
think this was a security precaution to do with printing cheques.
Any advice would be appreciated.
Richard Koett
[EMAIL PROTECTED]
------------------------------
From: Brian <[EMAIL PROTECTED]>
Crossposted-To: comp.os.linux.misc,comp.os.linux.setup
Subject: SE440BX-2 and sound
Date: 11 Aug 1999 20:30:42 GMT
i have a new se440bx-2 mainboard with the built in yamaha sound chips and
can't figure out which chipset to use while compiling kernel. i am using
kernal version 2.2-11 and redhat 5.0.
anyone had any luck?
thanks in advance
brian
================== Posted via CNET Linux Help ==================
http://www.searchlinux.com
------------------------------
From: Billy Donahue <[EMAIL PROTECTED]>
Subject: Re: half speed wav files?
Date: Wed, 11 Aug 1999 14:03:24 -0400
Robert C. Paulsen, Jr. wrote:
>
> Hello,
>
> Can anyone explain why, when using the following shell script, my
> *.wav files play at half speed?
>
> #!/bin/sh
> cat $1 > /dev/dsp
> Wave files play OK when using KDE's kmedia program.
/dev/dsp has to be configured with the proper ioctls
before it will play your file (sample rate, primarily).
It has a default sample rate, and your file appears to be
at twice that rate. So you need to downsample your WAV file,
or write a little C program to do the proper ioctls before
piping the data... Look at /usr/include/linux/soundcard.h
for the ioctls.
Hmm.. Come to think of it, the default
config (on open) of the audio devices
might make a nice /proc/sys interface. What do you think?
Then you could do this all with echo and cat...
kmedia is looking at the file header and sending the correct
setup ioctl's to /dev/dsp before piping samples into it.
You aren't.
> Also, the following shell script plays *.au files at the correct
> speed:
>
> #!/bin/sh
> cat $1 > /dev/audio
You got lucky.. Your .au file happened to be the default
8-bit u-law encoded audio samples.
------------------------------
From: [EMAIL PROTECTED] (Jeff McWilliams)
Subject: Re: 100BaseTX NIC recommendations?
Reply-To: [EMAIL PROTECTED]
Date: Wed, 11 Aug 1999 18:08:48 GMT
In article <[EMAIL PROTECTED]>, Breen Ouellette wrote:
>Hi,
>
> Does anyone out there have a recommendation for which 100BaseTX NICs
>work well with Linux? I plan to migrate part of my network from
>10BaseT.
>
> -Breen
>
I use the Intel Eepro 10/100 cards. They work well.
jeff
--
Jeff McWilliams - Advanced Development Engineer, ACE Technologies
[EMAIL PROTECTED]
------------------------------
** FOR YOUR REFERENCE **
The service address, to which questions about the list itself and requests
to be added to or deleted from it should be directed, is:
Internet: [EMAIL PROTECTED]
You can send mail to the entire list (and comp.os.linux.hardware) via:
Internet: [EMAIL PROTECTED]
Linux may be obtained via one of these FTP sites:
ftp.funet.fi pub/Linux
tsx-11.mit.edu pub/linux
sunsite.unc.edu pub/Linux
End of Linux-Hardware Digest
******************************
