From: Yi Li <adaml...@msn.com>

The adm1278 can optionally monitor the VOUT pin. This functionality is
not enabled at reset, so PMON_CONFIG needs to be modified in order to
enable it.

Signed-off-by: Yi Li <adaml...@msn.com>
Signed-off-by: Joel Stanley <j...@jms.id.au>
---

Guenter, I'm not sure if this is a valid thing to do in the probe function. If
not, can you suggest an alternative method for enabling this?

 drivers/hwmon/pmbus/adm1275.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
index 3baa4f4a8c5e..7d1f5f7891cc 100644
--- a/drivers/hwmon/pmbus/adm1275.c
+++ b/drivers/hwmon/pmbus/adm1275.c
@@ -500,6 +500,19 @@ static int adm1275_probe(struct i2c_client *client,
                tindex = 3;
 
                info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT;
+
+               /* By default when reset VOUT is not enabled */
+               if (!(config & ADM1278_VOUT_EN)) {
+                       config |= ADM1278_VOUT_EN;
+                       ret = i2c_smbus_write_byte_data(client,
+                                                       ADM1275_PMON_CONFIG,
+                                                       config);
+                       if (ret < 0) {
+                               dev_warn(&client->dev,
+                                       "Failed to enable VOUT monitoring\n");
+                       }
+               }
+
                if (config & ADM1278_TEMP1_EN)
                        info->func[0] |=
                                PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
-- 
2.9.3

--
To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to