On Tue, Oct 18, 2016 at 3:50 AM, Guenter Roeck <li...@roeck-us.net> wrote:
> On Mon, Oct 17, 2016 at 06:38:53PM +1030, Joel Stanley wrote:
>> From: Yi Li <adaml...@msn.com>
>>
>> The adm1278 can optionally monitor the VOUT pin. This functioanltiy is
>> not enabled at reset, so PMON_CONFIG needs to be modified in order to
>> enable it.
>>
>> Signed-off-by: Yi Li <adaml...@msn.com>
>> Signed-off-by: Joel Stanley <j...@jms.id.au>
>
> Applied to -next, after s/functioanltiy/functionality/

Thank you!

And thanks for fixing the grammar and spelling. The author is not a
native speaker, but I could have done a better job at checking.

Cheers,

Joel

>
> Thanks,
> Guenter
>
>> ---
>> v2:
>>  Return an error when unable to enable VOUT monitoring as suggestd by Guenter
>>
>>  drivers/hwmon/pmbus/adm1275.c | 20 ++++++++++++++++----
>>  1 file changed, 16 insertions(+), 4 deletions(-)
>>
>> diff --git a/drivers/hwmon/pmbus/adm1275.c b/drivers/hwmon/pmbus/adm1275.c
>> index 3baa4f4a8c5e..9940849351a1 100644
>> --- a/drivers/hwmon/pmbus/adm1275.c
>> +++ b/drivers/hwmon/pmbus/adm1275.c
>> @@ -499,15 +499,27 @@ static int adm1275_probe(struct i2c_client *client,
>>               pindex = 2;
>>               tindex = 3;
>>
>> -             info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT;
>> +             info->func[0] |= PMBUS_HAVE_PIN | PMBUS_HAVE_STATUS_INPUT |
>> +                     PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
>> +
>> +             /* By default when reset VOUT is not enabled */
>
> I also rephrased the comment a bit to make it easier to understand.
>
>> +             if (!(config & ADM1278_VOUT_EN)) {
>> +                     config |= ADM1278_VOUT_EN;
>> +                     ret = i2c_smbus_write_byte_data(client,
>> +                                                     ADM1275_PMON_CONFIG,
>> +                                                     config);
>> +                     if (ret < 0) {
>> +                             dev_err(&client->dev,
>> +                                     "Failed to enable VOUT monitoring\n");
>> +                             return -ENODEV;
>> +                     }
>> +             }
>> +
>>               if (config & ADM1278_TEMP1_EN)
>>                       info->func[0] |=
>>                               PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP;
>>               if (config & ADM1278_VIN_EN)
>>                       info->func[0] |= PMBUS_HAVE_VIN;
>> -             if (config & ADM1278_VOUT_EN)
>> -                     info->func[0] |=
>> -                             PMBUS_HAVE_VOUT | PMBUS_HAVE_STATUS_VOUT;
>>               break;
>>       case adm1293:
>>       case adm1294:
>> --
>> 2.9.3
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
>> the body of a message to majord...@vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to