On Thu, Dec 08, 2016 at 02:57:00PM +0100, Jean Delvare wrote:
> On Sun, 4 Dec 2016 20:55:27 -0800, Guenter Roeck wrote:
> > Module test reports overflows when writing into temperature and voltage
> > limit attributes
> >
> > temp1_min: Suspected overflow: [127000 vs. 0]
> > temp1_max: Suspected overflow: [127000 vs. 0]
> > temp1_offset: Suspected overflow: [127000 vs. 0]
> > temp2_min: Suspected overflow: [127000 vs. 0]
> > temp2_max: Suspected overflow: [127000 vs. 0]
> > temp2_offset: Suspected overflow: [127000 vs. 0]
> > temp3_min: Suspected overflow: [127000 vs. 0]
> > temp3_max: Suspected overflow: [127000 vs. 0]
> > temp3_offset: Suspected overflow: [127000 vs. 0]
> > in0_min: Suspected overflow: [3320 vs. 0]
> > in0_max: Suspected overflow: [3320 vs. 0]
> > in4_min: Suspected overflow: [15938 vs. 0]
> > in4_max: Suspected overflow: [15938 vs. 0]
> > in6_min: Suspected overflow: [1992 vs. 0]
> > in6_max: Suspected overflow: [1992 vs. 0]
> > in7_min: Suspected overflow: [2391 vs. 0]
> > in7_max: Suspected overflow: [2391 vs. 0]
> >
> > The problem is caused by conversions from unsigned long to long and
> > from long to int.
> >
> > Signed-off-by: Guenter Roeck <[email protected]>
> > ---
> > drivers/hwmon/smsc47m192.c | 3 ++-
> > 1 file changed, 2 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/hwmon/smsc47m192.c b/drivers/hwmon/smsc47m192.c
> > index 6ac7cda72d4c..202e167d6a59 100644
> > --- a/drivers/hwmon/smsc47m192.c
> > +++ b/drivers/hwmon/smsc47m192.c
> > @@ -77,6 +77,7 @@ static inline unsigned int IN_FROM_REG(u8 reg, int n)
> >
> > static inline u8 IN_TO_REG(unsigned long val, int n)
> > {
> > + val = clamp_val(val, 0, 65535);
> > return clamp_val(SCALE(val, 192, nom_mv[n]), 0, 255);
> > }
>
> Same as for adm9240, I would suggest to remove the second clamp_val():
>
> static inline u8 IN_TO_REG(unsigned long val, int n)
> {
> val = clamp_val(val, 0, nom_mv[n] * 255 / 192);
> return SCALE(val, 192, nom_mv[n]);
> }
>
I updated the patch accordingly.
Thanks,
Guenter
> >
> > @@ -84,7 +85,7 @@ static inline u8 IN_TO_REG(unsigned long val, int n)
> > * TEMP: 0.001 degC units (-128C to +127C)
> > * REG: 1C/bit, two's complement
> > */
> > -static inline s8 TEMP_TO_REG(int val)
> > +static inline s8 TEMP_TO_REG(long val)
> > {
> > return SCALE(clamp_val(val, -128000, 127000), 1, 1000);
> > }
>
> Other than this:
>
> Reviewed-by: Jean Delvare <[email protected]>
>
> --
> Jean Delvare
> SUSE L3 Support
> --
> To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
