pwm4 is enabled if bit 2 of GPIO control register 4 is disabled,
not when it is enabled. Since the check is for the skip condition,
it is reversed. This applies to both IT8620 and IT8628.
Fixes: 36c4d98a7883d ("hwmon: (it87) Add support for all pwm channels ...")
Signed-off-by: Guenter Roeck <[email protected]>
---
drivers/hwmon/it87.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c
index 85918d8a747a..4f3fabcd470d 100644
--- a/drivers/hwmon/it87.c
+++ b/drivers/hwmon/it87.c
@@ -2614,7 +2614,7 @@ static int __init it87_find(int sioaddr, unsigned short
*address,
/* Check for pwm4 */
reg = superio_inb(sioaddr, IT87_SIO_GPIO4_REG);
- if (!(reg & BIT(2)))
+ if (reg & BIT(2))
sio_data->skip_pwm |= BIT(3);
/* Check for pwm2, fan2 */
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
