On Wed, Mar 1, 2017 at 6:56 PM, Guenter Roeck <[email protected]> wrote:
> On Wed, Mar 01, 2017 at 04:57:00PM +0000, Punit Agrawal wrote:
>> Another way to fix this would be to add optional properties to the scpi
>> sensors binding and use them instead. This could then be used to fixup
>> values reported to both thermal and hwmon.
>>
>
> Yes, this would be much more appropriate.
What about something like:
sensor-coefficients = <x1 y1 z1>,
<x2 y2 z2>,
...;
Where in general `x` is the sensor-id, `y` the slope and `z` the
offset for the sensor reading.
So the reported reading to hwmon (and thermal for temperature) for
sensor with id `x1` is `y1 * val + z1`, the same for sensor with id x2
and so on for all the sensors in the array.
--
Carlo Caione
--
To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
