If the thermal subsystem returne -EPROBE_DEFER or any other error when hwmon calls devm_thermal_zone_of_sensor_register(), this is silently ignored.
I ran into this with an incorrectly defined thermal zone, making it non-existing and thus this call failed with -EPROBE_DEFER assuming it would appear later. The sensor was still added which is incorrect: sensors must strictly be added after the thermal zones, so deferred probe must be respected. Signed-off-by: Linus Walleij <[email protected]> --- ChangeLog v1->v2: - Explicitly discard -ENODEV as this is OK, forward any other errors. --- drivers/hwmon/hwmon.c | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) diff --git a/drivers/hwmon/hwmon.c b/drivers/hwmon/hwmon.c index c9790e2c3440..af5123042990 100644 --- a/drivers/hwmon/hwmon.c +++ b/drivers/hwmon/hwmon.c @@ -143,6 +143,7 @@ static int hwmon_thermal_add_sensor(struct device *dev, struct hwmon_device *hwdev, int index) { struct hwmon_thermal_data *tdata; + struct thermal_zone_device *tzd; tdata = devm_kzalloc(dev, sizeof(*tdata), GFP_KERNEL); if (!tdata) @@ -151,8 +152,14 @@ static int hwmon_thermal_add_sensor(struct device *dev, tdata->hwdev = hwdev; tdata->index = index; - devm_thermal_zone_of_sensor_register(&hwdev->dev, index, tdata, - &hwmon_thermal_ops); + tzd = devm_thermal_zone_of_sensor_register(&hwdev->dev, index, tdata, + &hwmon_thermal_ops); + /* + * If CONFIG_THERMAL_OF is disabled, this returns -ENODEV, + * so ignore that error but forward any other error. + */ + if (IS_ERR(tzd) && (PTR_ERR(tzd) != -ENODEV)) + return PTR_ERR(tzd); return 0; } @@ -621,14 +628,20 @@ __hwmon_device_register(struct device *dev, const char *name, void *drvdata, if (!chip->ops->is_visible(drvdata, hwmon_temp, hwmon_temp_input, j)) continue; - if (info[i]->config[j] & HWMON_T_INPUT) - hwmon_thermal_add_sensor(dev, hwdev, j); + if (info[i]->config[j] & HWMON_T_INPUT) { + err = hwmon_thermal_add_sensor(dev, + hwdev, j); + if (err) + goto free_device; + } } } } return hdev; +free_device: + device_unregister(hdev); free_hwmon: kfree(hwdev); ida_remove: -- 2.14.3 -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
