Robin Murphy <robin.mur...@arm.com> writes: > On 16/05/18 14:37, Stefan Wahren wrote: >> Recent VC4 firmware provides a hardware-independent way to retrieve the >> under-voltage sensor on the following Raspberry Pi boards: >> - Raspberry Pi B+ (via GPIO on SoC) >> - Raspberry Pi A+ (via GPIO on SoC) >> - Raspberry Pi 2 B (via GPIO on SoC) >> - Raspberry Pi 3 B (via GPIO on port expander) >> - Raspberry Pi 3 B+ (via PMIC) >> >> TODO: >> - try to make bcm2835 firmware a bus driver > > Do you actually need a DT binding? From the probe routine in patch 2 it > looks like this capability can be discovered dynamically by asking the > firmware, therefore it might be more straightforward for the firmware > driver itself to probe that and create a child device iff the feature is > present, which the hwmon driver can then bind to as a pure platform driver.
Agreed, let's skip doing this in DT. I just switched the bcm2835-camera driver over to not need DT, and I think you could do something similar (and use the pdev->dev.parent to get at the firmware device).
signature.asc
Description: PGP signature
