> -----Original Message-----
> From: Guenter Roeck [mailto:[email protected]]
> Sent: Tuesday, July 03, 2018 7:16 PM
> To: Vadim Pasternak <[email protected]>
> Cc: [email protected]; [email protected]; Michael Shych
> <[email protected]>
> Subject: Re: [v5,1/1] hwmon: (mlxreg-fan) Add support for Mellanox FAN driver
>
> On Tue, Jul 03, 2018 at 07:00:09AM +0000, Vadim Pasternak wrote:
> > Driver obtains PWM and tachometers registers location according to the
> > system configuration and creates FAN/PWM hwmon objects and a cooling
> > device. PWM and tachometers are controlled through the on-board
> > programmable device, which exports its register map. This device could
> > be attached to any bus type, for which register mapping is supported.
> > Single instance is created with one PWM control, up to 12 tachometers
> > and one cooling device. It could be as many instances as programmable
> > device supports.
> >
> > Currently driver will be activated from the Mellanox platform driver:
> > drivers/platform/x86/mlx-platform.c.
> > For the future ARM based systems it could be activated from the ARM
> > platform module.
> >
> > Signed-off-by: Vadim Pasternak <[email protected]>
>
> Applied to hwmon-next.
Thank you very much,
Vadim.
>
> Thanks,
> Guenter
--
To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
