Thanks! On Sun, Jul 8, 2018 at 4:10 PM Guenter Roeck <[email protected]> wrote: > > On Tue, Jul 03, 2018 at 03:26:49PM -0700, Kun Yi wrote: > > MAX34451 is a 16-Channel Voltage/Current Monitor and 12-Channel > > Sequencer. > > > > Signed-off-by: Kun Yi <[email protected]> > > Applied to hwmon-next. > > Thanks, > Guenter > > > --- > > Changes in v2: > > - Dynamically set MAX34451 page 0-15 functions based on channel > > config register value. > > > > Documentation/hwmon/max34440 | 16 ++++-- > > drivers/hwmon/pmbus/Kconfig | 2 +- > > drivers/hwmon/pmbus/max34440.c | 93 ++++++++++++++++++++++++++++++++-- > > 3 files changed, 103 insertions(+), 8 deletions(-) > > > > diff --git a/Documentation/hwmon/max34440 b/Documentation/hwmon/max34440 > > index 9ba6587b7657..b2de8fa49273 100644 > > --- a/Documentation/hwmon/max34440 > > +++ b/Documentation/hwmon/max34440 > > @@ -16,6 +16,11 @@ Supported chips: > > Prefixes: 'max34446' > > Addresses scanned: - > > Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX34446.pdf > > + * Maxim MAX34451 > > + PMBus 16-Channel V/I Monitor and 12-Channel Sequencer/Marginer > > + Prefixes: 'max34451' > > + Addresses scanned: - > > + Datasheet: http://datasheets.maximintegrated.com/en/ds/MAX34451.pdf > > * Maxim MAX34460 > > PMBus 12-Channel Voltage Monitor & Sequencer > > Prefix: 'max34460' > > @@ -36,9 +41,10 @@ Description > > This driver supports hardware monitoring for Maxim MAX34440 PMBus 6-Channel > > Power-Supply Manager, MAX34441 PMBus 5-Channel Power-Supply Manager > > and Intelligent Fan Controller, and MAX34446 PMBus Power-Supply Data > > Logger. > > -It also supports the MAX34460 and MAX34461 PMBus Voltage Monitor & > > Sequencers. > > -The MAX34460 supports 12 voltage channels, and the MAX34461 supports 16 > > voltage > > -channels. > > +It also supports the MAX34451, MAX34460, and MAX34461 PMBus Voltage > > Monitor & > > +Sequencers. The MAX34451 supports monitoring voltage or current of 12 > > channels > > +based on GIN pins. The MAX34460 supports 12 voltage channels, and the > > MAX34461 > > +supports 16 voltage channels. > > > > The driver is a client driver to the core PMBus driver. Please see > > Documentation/hwmon/pmbus for details on PMBus client drivers. > > @@ -93,7 +99,7 @@ curr[1-6]_max Maximum current. From > > IOUT_OC_WARN_LIMIT register. > > curr[1-6]_crit Critical maximum current. From > > IOUT_OC_FAULT_LIMIT register. > > curr[1-6]_max_alarm Current high alarm. From IOUT_OC_WARNING status. > > curr[1-6]_crit_alarm Current critical high alarm. From IOUT_OC_FAULT > > status. > > -curr[1-4]_average Historical average current (MAX34446 only). > > +curr[1-4]_average Historical average current (MAX34446/34451 only). > > curr[1-6]_highest Historical maximum current. > > curr[1-6]_reset_history Write any value to reset history. > > > > @@ -123,5 +129,7 @@ temp[1-8]_reset_history Write any value to reset > > history. > > temp7 and temp8 attributes only exist for MAX34440. > > MAX34446 only supports temp[1-3]. > > > > +MAX34451 supports attribute groups in[1-16] (or curr[1-16] based on input > > pins) > > +and temp[1-5]. > > MAX34460 supports attribute groups in[1-12] and temp[1-5]. > > MAX34461 supports attribute groups in[1-16] and temp[1-5]. > > diff --git a/drivers/hwmon/pmbus/Kconfig b/drivers/hwmon/pmbus/Kconfig > > index e71aec69e76e..a82018aaf473 100644 > > --- a/drivers/hwmon/pmbus/Kconfig > > +++ b/drivers/hwmon/pmbus/Kconfig > > @@ -130,7 +130,7 @@ config SENSORS_MAX34440 > > default n > > help > > If you say yes here you get hardware monitoring support for Maxim > > - MAX34440, MAX34441, MAX34446, MAX34460, and MAX34461. > > + MAX34440, MAX34441, MAX34446, MAX34451, MAX34460, and MAX34461. > > > > This driver can also be built as a module. If so, the module will > > be called max34440. > > diff --git a/drivers/hwmon/pmbus/max34440.c b/drivers/hwmon/pmbus/max34440.c > > index 74a1f6f68fb3..47576c460010 100644 > > --- a/drivers/hwmon/pmbus/max34440.c > > +++ b/drivers/hwmon/pmbus/max34440.c > > @@ -27,7 +27,7 @@ > > #include <linux/i2c.h> > > #include "pmbus.h" > > > > -enum chips { max34440, max34441, max34446, max34460, max34461 }; > > +enum chips { max34440, max34441, max34446, max34451, max34460, max34461 }; > > > > #define MAX34440_MFR_VOUT_PEAK 0xd4 > > #define MAX34440_MFR_IOUT_PEAK 0xd5 > > @@ -44,6 +44,9 @@ enum chips { max34440, max34441, max34446, max34460, > > max34461 }; > > #define MAX34440_STATUS_OT_FAULT BIT(5) > > #define MAX34440_STATUS_OT_WARN BIT(6) > > > > +#define MAX34451_MFR_CHANNEL_CONFIG 0xe4 > > +#define MAX34451_MFR_CHANNEL_CONFIG_SEL_MASK 0x3f > > + > > struct max34440_data { > > int id; > > struct pmbus_driver_info info; > > @@ -67,7 +70,7 @@ static int max34440_read_word_data(struct i2c_client > > *client, int page, int reg) > > MAX34440_MFR_VOUT_PEAK); > > break; > > case PMBUS_VIRT_READ_IOUT_AVG: > > - if (data->id != max34446) > > + if (data->id != max34446 && data->id != max34451) > > return -ENXIO; > > ret = pmbus_read_word_data(client, page, > > MAX34446_MFR_IOUT_AVG); > > @@ -143,7 +146,7 @@ static int max34440_write_word_data(struct i2c_client > > *client, int page, > > case PMBUS_VIRT_RESET_IOUT_HISTORY: > > ret = pmbus_write_word_data(client, page, > > MAX34440_MFR_IOUT_PEAK, 0); > > - if (!ret && data->id == max34446) > > + if (!ret && (data->id == max34446 || data->id == max34451)) > > ret = pmbus_write_word_data(client, page, > > MAX34446_MFR_IOUT_AVG, 0); > > > > @@ -202,6 +205,58 @@ static int max34440_read_byte_data(struct i2c_client > > *client, int page, int reg) > > return ret; > > } > > > > +static int max34451_set_supported_funcs(struct i2c_client *client, > > + struct max34440_data *data) > > +{ > > + /* > > + * Each of the channel 0-15 can be configured to monitor the following > > + * functions based on MFR_CHANNEL_CONFIG[5:0] > > + * 0x10: Sequencing + voltage monitoring (only valid for PAGES 0–11) > > + * 0x20: Voltage monitoring (no sequencing) > > + * 0x21: Voltage read only > > + * 0x22: Current monitoring > > + * 0x23: Current read only > > + * 0x30: General-purpose input active low > > + * 0x34: General-purpose input active high > > + * 0x00: Disabled > > + */ > > + > > + int page, rv; > > + > > + for (page = 0; page < 16; page++) { > > + rv = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page); > > + if (rv < 0) > > + return rv; > > + > > + rv = i2c_smbus_read_word_data(client, > > + MAX34451_MFR_CHANNEL_CONFIG); > > + if (rv < 0) > > + return rv; > > + > > + switch (rv & MAX34451_MFR_CHANNEL_CONFIG_SEL_MASK) { > > + case 0x10: > > + case 0x20: > > + data->info.func[page] = PMBUS_HAVE_VOUT | > > + PMBUS_HAVE_STATUS_VOUT; > > + break; > > + case 0x21: > > + data->info.func[page] = PMBUS_HAVE_VOUT; > > + break; > > + case 0x22: > > + data->info.func[page] = PMBUS_HAVE_IOUT | > > + PMBUS_HAVE_STATUS_IOUT; > > + break; > > + case 0x23: > > + data->info.func[page] = PMBUS_HAVE_IOUT; > > + break; > > + default: > > + break; > > + } > > + } > > + > > + return 0; > > +} > > + > > static struct pmbus_driver_info max34440_info[] = { > > [max34440] = { > > .pages = 14, > > @@ -325,6 +380,30 @@ static struct pmbus_driver_info max34440_info[] = { > > .read_word_data = max34440_read_word_data, > > .write_word_data = max34440_write_word_data, > > }, > > + [max34451] = { > > + .pages = 21, > > + .format[PSC_VOLTAGE_OUT] = direct, > > + .format[PSC_TEMPERATURE] = direct, > > + .format[PSC_CURRENT_OUT] = direct, > > + .m[PSC_VOLTAGE_OUT] = 1, > > + .b[PSC_VOLTAGE_OUT] = 0, > > + .R[PSC_VOLTAGE_OUT] = 3, > > + .m[PSC_CURRENT_OUT] = 1, > > + .b[PSC_CURRENT_OUT] = 0, > > + .R[PSC_CURRENT_OUT] = 2, > > + .m[PSC_TEMPERATURE] = 1, > > + .b[PSC_TEMPERATURE] = 0, > > + .R[PSC_TEMPERATURE] = 2, > > + /* func 0-15 is set dynamically before probing */ > > + .func[16] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, > > + .func[17] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, > > + .func[18] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, > > + .func[19] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, > > + .func[20] = PMBUS_HAVE_TEMP | PMBUS_HAVE_STATUS_TEMP, > > + .read_byte_data = max34440_read_byte_data, > > + .read_word_data = max34440_read_word_data, > > + .write_word_data = max34440_write_word_data, > > + }, > > [max34460] = { > > .pages = 18, > > .format[PSC_VOLTAGE_OUT] = direct, > > @@ -398,6 +477,7 @@ static int max34440_probe(struct i2c_client *client, > > const struct i2c_device_id *id) > > { > > struct max34440_data *data; > > + int rv; > > > > data = devm_kzalloc(&client->dev, sizeof(struct max34440_data), > > GFP_KERNEL); > > @@ -406,6 +486,12 @@ static int max34440_probe(struct i2c_client *client, > > data->id = id->driver_data; > > data->info = max34440_info[id->driver_data]; > > > > + if (data->id == max34451) { > > + rv = max34451_set_supported_funcs(client, data); > > + if (rv) > > + return rv; > > + } > > + > > return pmbus_do_probe(client, id, &data->info); > > } > > > > @@ -413,6 +499,7 @@ static const struct i2c_device_id max34440_id[] = { > > {"max34440", max34440}, > > {"max34441", max34441}, > > {"max34446", max34446}, > > + {"max34451", max34451}, > > {"max34460", max34460}, > > {"max34461", max34461}, > > {}
-- Regards, Kun -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
