The function has the measure update part and limits and settings part. And those parts can be split so split them for a maintainability.
Signed-off-by: Tokunori Ikegami <[email protected]> Cc: Guenter Roeck <[email protected]> Cc: Chris Packham <[email protected]> Cc: [email protected] --- drivers/hwmon/adt7475.c | 200 ++++++++++++++++++++++++++---------------------- 1 file changed, 107 insertions(+), 93 deletions(-) diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c index 9ef84998c7f3..270cabb49677 100644 --- a/drivers/hwmon/adt7475.c +++ b/drivers/hwmon/adt7475.c @@ -1658,123 +1658,137 @@ static void adt7475_read_pwm(struct i2c_client *client, int index) } } -static struct adt7475_data *adt7475_update_device(struct device *dev) +static void adt7475_update_measure(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct adt7475_data *data = i2c_get_clientdata(client); u16 ext; int i; - mutex_lock(&data->lock); + data->alarms = adt7475_read(REG_STATUS2) << 8; + data->alarms |= adt7475_read(REG_STATUS1); + + ext = (adt7475_read(REG_EXTEND2) << 8) | + adt7475_read(REG_EXTEND1); + for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) { + if (!(data->has_voltage & (1 << i))) + continue; + data->voltage[INPUT][i] = + (adt7475_read(VOLTAGE_REG(i)) << 2) | + ((ext >> (i * 2)) & 3); + } - /* Measurement values update every 2 seconds */ - if (time_after(jiffies, data->measure_updated + HZ * 2) || - !data->valid) { - data->alarms = adt7475_read(REG_STATUS2) << 8; - data->alarms |= adt7475_read(REG_STATUS1); - - ext = (adt7475_read(REG_EXTEND2) << 8) | - adt7475_read(REG_EXTEND1); - for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) { - if (!(data->has_voltage & (1 << i))) - continue; - data->voltage[INPUT][i] = - (adt7475_read(VOLTAGE_REG(i)) << 2) | - ((ext >> (i * 2)) & 3); - } + for (i = 0; i < ADT7475_TEMP_COUNT; i++) + data->temp[INPUT][i] = + (adt7475_read(TEMP_REG(i)) << 2) | + ((ext >> ((i + 5) * 2)) & 3); - for (i = 0; i < ADT7475_TEMP_COUNT; i++) - data->temp[INPUT][i] = - (adt7475_read(TEMP_REG(i)) << 2) | - ((ext >> ((i + 5) * 2)) & 3); + if (data->has_voltage & (1 << 5)) { + data->alarms |= adt7475_read(REG_STATUS4) << 24; + ext = adt7475_read(REG_EXTEND3); + data->voltage[INPUT][5] = adt7475_read(REG_VTT) << 2 | + ((ext >> 4) & 3); + } - if (data->has_voltage & (1 << 5)) { - data->alarms |= adt7475_read(REG_STATUS4) << 24; - ext = adt7475_read(REG_EXTEND3); - data->voltage[INPUT][5] = adt7475_read(REG_VTT) << 2 | - ((ext >> 4) & 3); - } + for (i = 0; i < ADT7475_TACH_COUNT; i++) { + if (i == 3 && !data->has_fan4) + continue; + data->tach[INPUT][i] = + adt7475_read_word(client, TACH_REG(i)); + } - for (i = 0; i < ADT7475_TACH_COUNT; i++) { - if (i == 3 && !data->has_fan4) - continue; - data->tach[INPUT][i] = - adt7475_read_word(client, TACH_REG(i)); - } + /* Updated by hw when in auto mode */ + for (i = 0; i < ADT7475_PWM_COUNT; i++) { + if (i == 1 && !data->has_pwm2) + continue; + data->pwm[INPUT][i] = adt7475_read(PWM_REG(i)); + } - /* Updated by hw when in auto mode */ - for (i = 0; i < ADT7475_PWM_COUNT; i++) { - if (i == 1 && !data->has_pwm2) - continue; - data->pwm[INPUT][i] = adt7475_read(PWM_REG(i)); - } + if (data->has_vid) + data->vid = adt7475_read(REG_VID) & 0x3f; +} - if (data->has_vid) - data->vid = adt7475_read(REG_VID) & 0x3f; +static void adt7475_update_limits(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adt7475_data *data = i2c_get_clientdata(client); + int i; - data->measure_updated = jiffies; + data->config4 = adt7475_read(REG_CONFIG4); + data->config5 = adt7475_read(REG_CONFIG5); + + for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) { + if (!(data->has_voltage & (1 << i))) + continue; + /* Adjust values so they match the input precision */ + data->voltage[MIN][i] = + adt7475_read(VOLTAGE_MIN_REG(i)) << 2; + data->voltage[MAX][i] = + adt7475_read(VOLTAGE_MAX_REG(i)) << 2; } - /* Limits and settings, should never change update every 60 seconds */ - if (time_after(jiffies, data->limits_updated + HZ * 60) || - !data->valid) { - data->config4 = adt7475_read(REG_CONFIG4); - data->config5 = adt7475_read(REG_CONFIG5); - - for (i = 0; i < ADT7475_VOLTAGE_COUNT; i++) { - if (!(data->has_voltage & (1 << i))) - continue; - /* Adjust values so they match the input precision */ - data->voltage[MIN][i] = - adt7475_read(VOLTAGE_MIN_REG(i)) << 2; - data->voltage[MAX][i] = - adt7475_read(VOLTAGE_MAX_REG(i)) << 2; - } + if (data->has_voltage & (1 << 5)) { + data->voltage[MIN][5] = adt7475_read(REG_VTT_MIN) << 2; + data->voltage[MAX][5] = adt7475_read(REG_VTT_MAX) << 2; + } - if (data->has_voltage & (1 << 5)) { - data->voltage[MIN][5] = adt7475_read(REG_VTT_MIN) << 2; - data->voltage[MAX][5] = adt7475_read(REG_VTT_MAX) << 2; - } + for (i = 0; i < ADT7475_TEMP_COUNT; i++) { + /* Adjust values so they match the input precision */ + data->temp[MIN][i] = + adt7475_read(TEMP_MIN_REG(i)) << 2; + data->temp[MAX][i] = + adt7475_read(TEMP_MAX_REG(i)) << 2; + data->temp[AUTOMIN][i] = + adt7475_read(TEMP_TMIN_REG(i)) << 2; + data->temp[THERM][i] = + adt7475_read(TEMP_THERM_REG(i)) << 2; + data->temp[OFFSET][i] = + adt7475_read(TEMP_OFFSET_REG(i)); + } + adt7475_read_hystersis(client); - for (i = 0; i < ADT7475_TEMP_COUNT; i++) { - /* Adjust values so they match the input precision */ - data->temp[MIN][i] = - adt7475_read(TEMP_MIN_REG(i)) << 2; - data->temp[MAX][i] = - adt7475_read(TEMP_MAX_REG(i)) << 2; - data->temp[AUTOMIN][i] = - adt7475_read(TEMP_TMIN_REG(i)) << 2; - data->temp[THERM][i] = - adt7475_read(TEMP_THERM_REG(i)) << 2; - data->temp[OFFSET][i] = - adt7475_read(TEMP_OFFSET_REG(i)); - } - adt7475_read_hystersis(client); + for (i = 0; i < ADT7475_TACH_COUNT; i++) { + if (i == 3 && !data->has_fan4) + continue; + data->tach[MIN][i] = + adt7475_read_word(client, TACH_MIN_REG(i)); + } - for (i = 0; i < ADT7475_TACH_COUNT; i++) { - if (i == 3 && !data->has_fan4) - continue; - data->tach[MIN][i] = - adt7475_read_word(client, TACH_MIN_REG(i)); - } + for (i = 0; i < ADT7475_PWM_COUNT; i++) { + if (i == 1 && !data->has_pwm2) + continue; + data->pwm[MAX][i] = adt7475_read(PWM_MAX_REG(i)); + data->pwm[MIN][i] = adt7475_read(PWM_MIN_REG(i)); + /* Set the channel and control information */ + adt7475_read_pwm(client, i); + } - for (i = 0; i < ADT7475_PWM_COUNT; i++) { - if (i == 1 && !data->has_pwm2) - continue; - data->pwm[MAX][i] = adt7475_read(PWM_MAX_REG(i)); - data->pwm[MIN][i] = adt7475_read(PWM_MIN_REG(i)); - /* Set the channel and control information */ - adt7475_read_pwm(client, i); - } + data->range[0] = adt7475_read(TEMP_TRANGE_REG(0)); + data->range[1] = adt7475_read(TEMP_TRANGE_REG(1)); + data->range[2] = adt7475_read(TEMP_TRANGE_REG(2)); +} + +static struct adt7475_data *adt7475_update_device(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + struct adt7475_data *data = i2c_get_clientdata(client); - data->range[0] = adt7475_read(TEMP_TRANGE_REG(0)); - data->range[1] = adt7475_read(TEMP_TRANGE_REG(1)); - data->range[2] = adt7475_read(TEMP_TRANGE_REG(2)); + mutex_lock(&data->lock); + + /* Measurement values update every 2 seconds */ + if (time_after(jiffies, data->measure_updated + HZ * 2) || + !data->valid) { + adt7475_update_measure(dev); + data->measure_updated = jiffies; + } + /* Limits and settings, should never change update every 60 seconds */ + if (time_after(jiffies, data->limits_updated + HZ * 60) || + !data->valid) { + adt7475_update_limits(dev); data->limits_updated = jiffies; data->valid = 1; } - mutex_unlock(&data->lock); return data; -- 2.16.1 -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
