Hi Dan-san, Thank you so much for the fixes. But very sorry for the problem caused by my changes.
I have reviewed them and those look good. Reviewed-by: Tokunori Ikegami <ikeg...@allied-telesis.co.jp> Regards, Ikegami > -----Original Message----- > From: Dan Carpenter [mailto:dan.carpen...@oracle.com] > Sent: Tuesday, August 14, 2018 6:13 PM > To: Jean Delvare; IKEGAMI Tokunori > Cc: Guenter Roeck; linux-hwmon@vger.kernel.org; > kernel-janit...@vger.kernel.org > Subject: [PATCH 1/2] hwmon: (adt7475) Potential error pointer > dereferences > > The adt7475_update_device() function returns error pointers. The > problem is that in show_pwmfreq() we dereference it before the check. > And then in pwm_use_point2_pwm_at_crit_show() there isn't a check at > all. I don't know if it's required, but it silences a static checker > warning and it's doesn't hurt anything to check. > > Signed-off-by: Dan Carpenter <dan.carpen...@oracle.com> > > diff --git a/drivers/hwmon/adt7475.c b/drivers/hwmon/adt7475.c > index 90837f7c7d0f..16045149f3db 100644 > --- a/drivers/hwmon/adt7475.c > +++ b/drivers/hwmon/adt7475.c > @@ -962,13 +962,14 @@ static ssize_t show_pwmfreq(struct device *dev, > struct device_attribute *attr, > { > struct adt7475_data *data = adt7475_update_device(dev); > struct sensor_device_attribute_2 *sattr = > to_sensor_dev_attr_2(attr); > - int i = clamp_val(data->range[sattr->index] & 0xf, 0, > - ARRAY_SIZE(pwmfreq_table) - 1); > + int idx; > > if (IS_ERR(data)) > return PTR_ERR(data); > + idx = clamp_val(data->range[sattr->index] & 0xf, 0, > + ARRAY_SIZE(pwmfreq_table) - 1); > > - return sprintf(buf, "%d\n", pwmfreq_table[i]); > + return sprintf(buf, "%d\n", pwmfreq_table[idx]); > } > > static ssize_t set_pwmfreq(struct device *dev, struct device_attribute > *attr, > @@ -1004,6 +1005,10 @@ static ssize_t > pwm_use_point2_pwm_at_crit_show(struct device *dev, > char *buf) > { > struct adt7475_data *data = adt7475_update_device(dev); > + > + if (IS_ERR(data)) > + return PTR_ERR(data); > + > return sprintf(buf, "%d\n", !!(data->config4 & > CONFIG4_MAXDUTY)); > } >
