Added device tree binding documentation for Nuvoton BMC NPCM7xx BIOS Post Code (BPC). The NPCM7xx BPC monitoring two configurable I/O addresses written by the host on Low Pin Count (LPC) bus.
Signed-off-by: Tomer Maimon <[email protected]> --- .../devicetree/bindings/bmc/npcm7xx-lpc-bpc.txt | 26 ++++++++++++++++++++++ 1 file changed, 26 insertions(+) create mode 100644 Documentation/devicetree/bindings/bmc/npcm7xx-lpc-bpc.txt diff --git a/Documentation/devicetree/bindings/bmc/npcm7xx-lpc-bpc.txt b/Documentation/devicetree/bindings/bmc/npcm7xx-lpc-bpc.txt new file mode 100644 index 000000000000..0832c9cbea32 --- /dev/null +++ b/Documentation/devicetree/bindings/bmc/npcm7xx-lpc-bpc.txt @@ -0,0 +1,26 @@ +Nuvoton NPCM7xx LPC BPC interface + +Nuvoton BMC NPCM7xx BIOS Post Code (BPC) monitoring two +configurable I/O addresses written by the host on the +Low Pin Count (LPC) bus, the capure data stored in 128-word FIFO. + +NPCM7xx BPC supports capture double words, when using capture +double word only I/O address 1 is monitored. + +Required properties for lpc_bpc node +- compatible : "nuvoton,npcm750-lpc-bpc" for Poleg NPCM7XX. +- reg : specifies physical base address and size of the registers. +- interrupts : contain the LPC BPC with flags for falling edge. +- monitor-ports : contain monitor I/O addresses, at least one monitor I/O + address required + +Optional property for lpc_bpc node +- bpc-en-dwcapture : enable capture double words support. + +Example: + lpc_bpc: lpc-bpc@f0007040 { + compatible = "nuvoton,npcm7xx-lpc-bpc"; + reg = <0xf0007040 0x14>; + monitor-ports = <0x80>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; -- 2.14.1 -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
