On Sat, Sep 29, 2018 at 02:44:06PM -0700, Nicolin Chen wrote: > The three INA3221_CONFIG_MODE macros are not correctly defined here. > The MODE3-1 filed is loacted at BIT 2-0 according to the datasheet. > located
> So this patch just fixes them by shifting all of them with a correct > offset. However, this isn't a crital bug fix as the driver does not > use any of them at this point. > > Signed-off-by: Nicolin Chen <[email protected]> No need to resend; I fixed it up. Applied to hwmon-next. Thanks, Guenter > --- > drivers/hwmon/ina3221.c | 6 +++--- > 1 file changed, 3 insertions(+), 3 deletions(-) > > diff --git a/drivers/hwmon/ina3221.c b/drivers/hwmon/ina3221.c > index cfe65ff01051..e0c4f4d83f4e 100644 > --- a/drivers/hwmon/ina3221.c > +++ b/drivers/hwmon/ina3221.c > @@ -38,9 +38,9 @@ > #define INA3221_WARN3 0x0c > #define INA3221_MASK_ENABLE 0x0f > > -#define INA3221_CONFIG_MODE_SHUNT BIT(1) > -#define INA3221_CONFIG_MODE_BUS BIT(2) > -#define INA3221_CONFIG_MODE_CONTINUOUS BIT(3) > +#define INA3221_CONFIG_MODE_SHUNT BIT(0) > +#define INA3221_CONFIG_MODE_BUS BIT(1) > +#define INA3221_CONFIG_MODE_CONTINUOUS BIT(2) > > #define INA3221_RSHUNT_DEFAULT 10000 >
