Devices with compatible="pmbus" field have zero initial page count, and pmbus_clear_faults() being called before the page count auto- detection does not actually clear faults because it depends on the page count. Non-cleared faults in its turn may fail the subsequent page count auto-detection.
This patch fixes this problem by calling pmbus_clear_fault_page() for currently set page and calling pmbus_clear_faults() after the page count was detected. Signed-off-by: Dmitry Bazhenov <[email protected]> --- drivers/hwmon/pmbus/pmbus.c | 2 ++ drivers/hwmon/pmbus/pmbus_core.c | 5 ++++- 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/hwmon/pmbus/pmbus.c b/drivers/hwmon/pmbus/pmbus.c index 7718e58dbda5..7688dab32f6e 100644 --- a/drivers/hwmon/pmbus/pmbus.c +++ b/drivers/hwmon/pmbus/pmbus.c @@ -118,6 +118,8 @@ static int pmbus_identify(struct i2c_client *client, } else { info->pages = 1; } + + pmbus_clear_faults(client); } if (pmbus_check_byte_register(client, 0, PMBUS_VOUT_MODE)) { diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c index 82c3754e21e3..2e2b5851139c 100644 --- a/drivers/hwmon/pmbus/pmbus_core.c +++ b/drivers/hwmon/pmbus/pmbus_core.c @@ -2015,7 +2015,10 @@ static int pmbus_init_common(struct i2c_client *client, struct pmbus_data *data, if (ret >= 0 && (ret & PB_CAPABILITY_ERROR_CHECK)) client->flags |= I2C_CLIENT_PEC; - pmbus_clear_faults(client); + if (data->info->pages) + pmbus_clear_faults(client); + else + pmbus_clear_fault_page(client, -1); if (info->identify) { ret = (*info->identify)(client, info); -- 2.17.1
