On 9/11/18 11:56 AM, Chris Packham wrote:
> With the addition of the invert-pwm property the adt7475 needs its own
> binding documentation rather being captured under trivial-devices.txt.
> 
> Signed-off-by: Chris Packham <chris.pack...@alliedtelesis.co.nz>
> ---
> Changes in v2:
> - use pwm-polarity attiribute to indicate normal or inverted polarity.
> 
>   .../devicetree/bindings/hwmon/adt7475.txt     | 24 +++++++++++++++++++
>   .../devicetree/bindings/trivial-devices.txt   |  4 ----
>   2 files changed, 24 insertions(+), 4 deletions(-)
>   create mode 100644 Documentation/devicetree/bindings/hwmon/adt7475.txt
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.txt 
> b/Documentation/devicetree/bindings/hwmon/adt7475.txt
> new file mode 100644
> index 000000000000..d9212b5e9036
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/adt7475.txt
> @@ -0,0 +1,24 @@
> +*ADT7475 hwmon sensor.
> +
> +Required properties:
> +- compatible: One of
> +     "adi,adt7473"
> +     "adi,adt7475"
> +     "adi,adt7476"
> +     "adi,adt7490"
> +
> +- reg: I2C address
> +
> +optional properties:
> +
> +- pwm-polarity: This configures the polarity of the PWM. 0
> +             (PWM_POLARITY_NORMAL) uses logic high for 100% duty cycle. 1
> +                (PWM_POLARITY_INVERSED) uses logic low for 100% duty cycle.
> +
> +Example:
> +
> +hwmon@2e {
> +     compatible = ;

Oops. I should include a working example. I've fixed this locally but 
I'll hold off on sending v3 to see if there is any additional feedback.

> +     reg = <0x2e>;
> +     pwm-polarity = <1>;
> +};
> diff --git a/Documentation/devicetree/bindings/trivial-devices.txt 
> b/Documentation/devicetree/bindings/trivial-devices.txt
> index 69c934aec13b..4f29100d6bbf 100644
> --- a/Documentation/devicetree/bindings/trivial-devices.txt
> +++ b/Documentation/devicetree/bindings/trivial-devices.txt
> @@ -14,10 +14,6 @@ ad,ad7414          SMBus/I2C Digital Temperature Sensor in 
> 6-Pin SOT with SMBus Alert an
>   ad,adm9240          ADM9240:  Complete System Hardware Monitor for 
> uProcessor-Based Systems
>   adi,adt7461         +/-1C TDM Extended Temp Range I.C
>   adt7461                     +/-1C TDM Extended Temp Range I.C
> -adi,adt7473          +/-1C TDM Extended Temp Range I.C
> -adi,adt7475          +/-1C TDM Extended Temp Range I.C
> -adi,adt7476          +/-1C TDM Extended Temp Range I.C
> -adi,adt7490          +/-1C TDM Extended Temp Range I.C
>   adi,adxl345         Three-Axis Digital Accelerometer
>   adi,adxl346         Three-Axis Digital Accelerometer 
> (backward-compatibility value "adi,adxl345" must be listed too)
>   ams,iaq-core                AMS iAQ-Core VOC Sensor
> 

Reply via email to