On 28.05.2019 20:16, Marek Vasut wrote:
> Add support for handling the TJA11xx PHY IRQ signal.
>
> Signed-off-by: Marek Vasut <[email protected]>
> Cc: Andrew Lunn <[email protected]>
> Cc: Florian Fainelli <[email protected]>
> Cc: Guenter Roeck <[email protected]>
> Cc: Heiner Kallweit <[email protected]>
> Cc: Jean Delvare <[email protected]>
> Cc: [email protected]
> ---
> drivers/net/phy/nxp-tja11xx.c | 32 ++++++++++++++++++++++++++++++++
> 1 file changed, 32 insertions(+)
>
> diff --git a/drivers/net/phy/nxp-tja11xx.c b/drivers/net/phy/nxp-tja11xx.c
> index b705d0bd798b..0be9fe9a9604 100644
> --- a/drivers/net/phy/nxp-tja11xx.c
> +++ b/drivers/net/phy/nxp-tja11xx.c
> @@ -40,6 +40,8 @@
> #define MII_INTSRC_TEMP_ERR BIT(1)
> #define MII_INTSRC_UV_ERR BIT(3)
>
> +#define MII_INTEN 22
> +
> #define MII_COMMSTAT 23
> #define MII_COMMSTAT_LINK_UP BIT(15)
>
> @@ -239,6 +241,30 @@ static int tja11xx_read_status(struct phy_device *phydev)
> return 0;
> }
>
> +static int tja11xx_config_intr(struct phy_device *phydev)
> +{
> + int ret;
> +
> + if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
> + ret = phy_write(phydev, MII_INTEN, 0xcfef);
As Florian commented already, such magic numbers are not nice.
Better add a constant for each bit representing an interrupt
source. Please note that phylib is interested in the link
change event only. Therefore typically only one bit is set.
> + else
> + ret = phy_write(phydev, MII_INTEN, 0);
> +
> + if (ret < 0)
> + return ret;
> +
> + ret = phy_read(phydev, MII_INTSRC);
> +
This IRQ ACK can be removed. It's done by phylib, see
phy_enable_interrupts().
> + return ret < 0 ? ret : 0;
> +}
> +
> +static int tja11xx_ack_interrupt(struct phy_device *phydev)
> +{
> + int ret = phy_read(phydev, MII_INTSRC);
> +
> + return ret < 0 ? ret : 0;
> +}
> +
> static int tja11xx_get_sset_count(struct phy_device *phydev)
> {
> return ARRAY_SIZE(tja11xx_hw_stats);
> @@ -366,6 +392,9 @@ static struct phy_driver tja11xx_driver[] = {
> .suspend = genphy_suspend,
> .resume = genphy_resume,
> .set_loopback = genphy_loopback,
> + /* IRQ related */
> + .config_intr = tja11xx_config_intr,
> + .ack_interrupt = tja11xx_ack_interrupt,
> /* Statistics */
> .get_sset_count = tja11xx_get_sset_count,
> .get_strings = tja11xx_get_strings,
> @@ -381,6 +410,9 @@ static struct phy_driver tja11xx_driver[] = {
> .suspend = genphy_suspend,
> .resume = genphy_resume,
> .set_loopback = genphy_loopback,
> + /* IRQ related */
> + .config_intr = tja11xx_config_intr,
> + .ack_interrupt = tja11xx_ack_interrupt,
> /* Statistics */
> .get_sset_count = tja11xx_get_sset_count,
> .get_strings = tja11xx_get_strings,
>
