On 06/06/2019 14:02, Guenter Roeck wrote:
> Hi Colin,
>
> On 6/6/19 5:27 AM, Colin King wrote:
>> From: Colin Ian King <[email protected]>
>>
>> Currently the return from the call to nct7904_read is being masked
>> and so and negative error returns are being stripped off and the
>> error check is always false. Fix this by checking on err first and
>> then masking the return value in ret.
>>
>> Addresses-Coverity: ("Logically dead code")
>> Fixes: af55ab0b0792 ("hwmon: (nct7904) Add extra sysfs support for
>> fan, voltage and temperature.")
>> Signed-off-by: Colin Ian King <[email protected]>
>
> Thanks a lot for the patch. The offending patch had several additional
> problems (shame on me for sloppy review), so I pulled it from the branch
> and asked the author to fix all problems and resubmit.
Ah, good. I was going to address some other issues too. That saves some
work.
Colin
>
> Guenter
>
>> ---
>> drivers/hwmon/nct7904.c | 4 ++--
>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/hwmon/nct7904.c b/drivers/hwmon/nct7904.c
>> index dd450dd29ac7..5fa69898674c 100644
>> --- a/drivers/hwmon/nct7904.c
>> +++ b/drivers/hwmon/nct7904.c
>> @@ -928,10 +928,10 @@ static int nct7904_probe(struct i2c_client *client,
>> /* Check DTS enable status */
>> if (data->enable_dts) {
>> - ret = nct7904_read_reg(data, BANK_0, DTS_T_CTRL0_REG) & 0xF;
>> + ret = nct7904_read_reg(data, BANK_0, DTS_T_CTRL0_REG);
>> if (ret < 0)
>> return ret;
>> - data->has_dts = ret;
>> + data->has_dts = ret & 0xF;
>> if (data->enable_dts & ENABLE_TSI) {
>> ret = nct7904_read_reg(data, BANK_0, DTS_T_CTRL1_REG);
>> if (ret < 0)
>>
>
