On 7/9/19 2:50 AM, Iker Perez wrote:
From: Iker Perez del Palomar Sustatxa <iker.pe...@codethink.co.uk>
Switch between the possible update_time values and write into the
configuration register the selected value.
Signed-off-by: Iker Perez del Palomar Sustatxa <iker.pe...@codethink.co.uk>
---
drivers/hwmon/lm75.c | 43 ++++++++++++++++++++++++++++++++++---------
1 file changed, 34 insertions(+), 9 deletions(-)
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index 5ba7277dac69..9d48a85fd3e5 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -156,21 +156,46 @@ static int lm75_read(struct device *dev, enum
hwmon_sensor_types type,
}
static int lm75_write(struct device *dev, enum hwmon_sensor_types type,
- u32 attr, int channel, long temp)
+ u32 attr, int channel, long val)
{
struct lm75_data *data = dev_get_drvdata(dev);
- u8 resolution;
- int reg;
+ u8 resolution, set_mask, clr_mask;
+ int reg, status;
+
+ // This are provisional changes, to be improved in case this approach
works
+ set_mask = 0;
+ clr_mask = LM75_SHUTDOWN;
switch (type) {
case hwmon_chip:
switch (attr) {
case hwmon_chip_update_interval:
- if (data->kind == tmp75b)
- pr_info("Iker inside write\n");
+ if (data->kind == tmp75b) {
+ clr_mask |= 1 << 15 | 0x3 << 13;
+ switch (val) {
+ case (27):
+ set_mask |= 0x3 << 13;
+ data->sample_time = MSEC_PER_SEC / 37;
+ break;
+ case (55):
+ set_mask |= 0x2 << 13;
+ data->sample_time = MSEC_PER_SEC / 18;
+ break;
+ case (111):
+ set_mask |= 0x1 << 13;
+ data->sample_time = MSEC_PER_SEC / 9;
+ break;
+ case (250):
+ set_mask |= 0x0 << 13;
+ data->sample_time = MSEC_PER_SEC / 4;
+ break;
+ default:
+ return -EINVAL;
+ status = configure_reg(set_mask, clr_mask,
data, client);
You'll probably want to provide all the necessary variants (supported update
times
as well as associated resolutions and set/clear masks) in the data structure,
to make it easy to support multiple chips. Either case, it is unacceptable to
only accept specific values: You can not expect the user to figure out
individual
supported values on a per-chip basis. Please use something like find_closest()
to find the best match.
+ }
+ }
else
return -EINVAL;
- break;
default:
return -EINVAL;
}
@@ -195,11 +220,11 @@ static int lm75_write(struct device *dev, enum
hwmon_sensor_types type,
else
resolution = data->resolution;
- temp = clamp_val(temp, LM75_TEMP_MIN, LM75_TEMP_MAX);
- temp = DIV_ROUND_CLOSEST(temp << (resolution - 8),
+ val = clamp_val(val, LM75_TEMP_MIN, LM75_TEMP_MAX);
+ val = DIV_ROUND_CLOSEST(val << (resolution - 8),
1000) << (16 - resolution);
- return regmap_write(data->regmap, reg, temp);
+ return regmap_write(data->regmap, reg, val);
default:
return -EINVAL;
}
