Hi,
On Azure/Hyper-V, any MTU change on an hv_netvsc interface silently zeroes a
user-configured RSS indirection table, so all RX traffic lands on ring 0.
Reproducer in our case (any multi-queue hv_netvsc NIC, ethtool and ip only):
```
ethtool -X eth0 hkey $SOME_KEY equal 4
ethtool -x eth0 # See conf
ip link set eth0 mtu 1600 # must differ from the current MTU
ethtool -x eth0 # all zeros in indirection table
```
With the table left to the driver (ethtool -X eth0 default) the same MTU
change is harmless: the table comes back correctly spread.
Confirmed with kprobes on 6.12.90 - these all fire on the MTU write:
```
netvsc_change_mtu
netvsc_detach
rndis_filter_device_remove
netvsc_attach
rndis_filter_device_add
```
[`netvsc_change_mtu()`](https://github.com/torvalds/linux/blob/v6.12/drivers/net/hyperv/netvsc_drv.c#L1209)
An MTU change re-creates the device:
[detach](https://github.com/torvalds/linux/blob/v6.12/drivers/net/hyperv/netvsc_drv.c#L1233),
then
[attach](https://github.com/torvalds/linux/blob/v6.12/drivers/net/hyperv/netvsc_drv.c#L1239).
The detach [frees the RSS indirection
table](https://github.com/torvalds/linux/blob/v6.12/drivers/net/hyperv/rndis_filter.c#L1622)
(`rndis_filter_device_remove()`), and the attach
[allocates it
zeroed](https://github.com/torvalds/linux/blob/v6.12/drivers/net/hyperv/rndis_filter.c#L1557)
with `kcalloc()` and refills it only if
[`(!netif_is_rxfh_configured(net))`](https://github.com/torvalds/linux/blob/v6.12/drivers/net/hyperv/rndis_filter.c#L1572)
(`rndis_filter_device_add()`).