On 11/4/2026 18:01, Mukesh R wrote:
> Add a new file to implement a kernel only virtual IOMMU that works
> on Microsoft Hyper-V hypervisor (aka MSHV) in privileged VMs aka
> root VMs. The hypervisor claims the IOMMU upon boot, and this driver
> communicates with it for creating and deleting paging domains, attaching
> of devices, mapping and unmapping of pages, etc. During boot, hypervisor
> automatically creates identity and blocked domains, so there is no need
> to do hypercalls to create them. This is a kernel only driver and only
> supported on baremetal root (and not L1VH root) without any guest passthru
> support. Support for guest device passthru will be added incrementally.
> 
> Signed-off-by: Mukesh R <[email protected]>
> ---
>  arch/x86/kernel/pci-dma.c            |   2 +
>  drivers/iommu/hyperv/Kconfig         |  13 +
>  drivers/iommu/hyperv/Makefile        |   1 +
>  drivers/iommu/hyperv/hv-iommu-root.c | 613 +++++++++++++++++++++++++++
>  include/asm-generic/mshyperv.h       |   3 +
>  include/linux/hyperv.h               |   6 +
>  6 files changed, 638 insertions(+)
>  create mode 100644 drivers/iommu/hyperv/hv-iommu-root.c
> 

<snip>

>  obj-$(CONFIG_HYPERV_PVIOMMU) += hv-iommu-guest.o
> +obj-$(CONFIG_HYPERV_ROOT_IOMMU) += hv-iommu-root.o
> diff --git a/drivers/iommu/hyperv/hv-iommu-root.c 
> b/drivers/iommu/hyperv/hv-iommu-root.c
> new file mode 100644
> index 000000000000..e0e3e9d4385e
> --- /dev/null
> +++ b/drivers/iommu/hyperv/hv-iommu-root.c
> @@ -0,0 +1,613 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Hyper-V root vIOMMU driver.
> + * Copyright (C) 2026, Microsoft, Inc.
> + */
> +#include <linux/pci.h>
> +#include <linux/dma-map-ops.h>
> +#include <linux/interval_tree.h>
> +#include <linux/hyperv.h>
> +#include <asm/iommu.h>
> +#include <asm/mshyperv.h>
> +#include "../dma-iommu.h"
> +
> +static dma_addr_t hv_iommu_max_iova;
> +static struct iommu_domain_ops hv_paging_domain_ops;
> +
> +/* IOMMU device that we export to the world. MSHV supports max of one */
> +static struct iommu_device hv_virt_iommu;
> +
> +struct hv_iommu_domain {
> +     struct iommu_domain iommu_dom;
> +     u32 domid_num;                        /* as opposed to domain_id.type */
> +     spinlock_t mappings_lock;             /* protects mappings_tree */
> +     struct rb_root_cached mappings_tree;  /* iova to pa lookup tree */
> +};
> +
> +#define to_hv_domain(d) container_of(d, struct hv_iommu_domain, iommu_dom)
> +
> +struct hv_iommu_mapping {
> +     phys_addr_t paddr;
> +     struct interval_tree_node iova;
> +     u32 flags;
> +};
> +
> +/*
> + * By default, during boot the hypervisor creates one Stage 2 (S2) default
> + * domain. It has two types:
> + *   S2 default: access to entire root partition memory. This for the host
> + *            maps to IOMMU_DOMAIN_IDENTITY in the iommu subsystem, and
> + *            is called HV_DEVICE_DOMAIN_ID_S2_DEFAULT in the hypervisor.
> + *            (Linux renamed to : HV_DEVICE_DOMAIN_ID_DEFAULT)
> + *   S2 NULL: Blocks everything, ie, IOMMU_DOMAIN_BLOCKED in linux.
> + */
> +
> +/*
> + * Create dummy domains to correspond to hypervisor prebuilt default identity
> + * and null domains (dummy because we do not make hypercalls to create them).
> + */
> +static struct hv_iommu_domain hv_def_identity_dom;
> +static struct hv_iommu_domain hv_def_blocked_dom;
> +
> +/*
> + * The hypervisor owns the IOMMU. As such it will choose the best page size
> + * and whenever possible use larger page sizes automatically. The map gpa
> + * hypercall to map the iova however currently uses only 4K pfns as input.
> + * So we specify 4K as the IOMMU PAGE_SIZE.
> + */
> +#define HV_IOMMU_PGSIZES SZ_4K
> +
> +static DEFINE_IDA(hv_iommu_domids);   /* unique numeric ids for new domains 
> */
> +
> +static bool hv_iommu_capable(struct device *dev, enum iommu_cap cap)
> +{
> +     switch (cap) {
> +     case IOMMU_CAP_CACHE_COHERENCY:
> +             return true;
> +     default:
> +             return false;
> +     }
> +}

Seems like this could match the guest driver and just be: return cap == 
IOMMU_CAP_CACHE_COHERENCY.

<snip>

> +
> +static struct iommu_domain_ops hv_paging_domain_ops = {
> +     .attach_dev = hv_iommu_attach_dev,
> +     .map_pages = hv_iommu_map_pages,
> +     .unmap_pages = hv_iommu_unmap_pages,
> +     .iova_to_phys = hv_iommu_iova_to_phys,
> +     .free = hv_iommu_domain_free,
> +};
> +
> +static struct iommu_ops hv_iommu_ops = {
> +     .capable            = hv_iommu_capable,
> +     .domain_alloc_paging    = hv_iommu_domain_alloc_paging,
> +     .probe_device       = hv_iommu_probe_device,
> +     .device_group       = pci_device_group,
> +     .get_resv_regions   = hv_iommu_get_resv_regions,
> +     .owner              = THIS_MODULE,
> +     .identity_domain    = &hv_def_identity_dom.iommu_dom,
> +     .blocked_domain     = &hv_def_blocked_dom.iommu_dom,
> +     .release_domain     = &hv_def_blocked_dom.iommu_dom,
> +};
> +
> +static const struct iommu_domain_ops hv_special_domain_ops = {
> +     .attach_dev = hv_iommu_attach_dev,
> +};
> +
> +static void __init hv_initialize_special_domains(void)
> +{
> +     hv_def_identity_dom.iommu_dom.type = IOMMU_DOMAIN_IDENTITY;
> +     hv_def_identity_dom.iommu_dom.ops = &hv_special_domain_ops;
> +     hv_def_identity_dom.iommu_dom.owner = &hv_iommu_ops;
> +     hv_def_identity_dom.domid_num = HV_DEVICE_DOMAIN_ID_DEFAULT; /* 0 */
> +
> +     hv_def_blocked_dom.iommu_dom.type = IOMMU_DOMAIN_BLOCKED;
> +     hv_def_blocked_dom.iommu_dom.ops = &hv_special_domain_ops;
> +     hv_def_blocked_dom.iommu_dom.owner = &hv_iommu_ops;
> +     hv_def_blocked_dom.domid_num = HV_DEVICE_DOMAIN_ID_NULL;    /* INTMAX */
> +}
> +

A net negative 9 lines to initialize these with .field notation, as suggested 
in v0: 
https://lore.kernel.org/all/[email protected]/

Wasn't super hard to do the 1 forward declaration needed...

diff --git a/drivers/iommu/hyperv/hv-iommu-root.c 
b/drivers/iommu/hyperv/hv-iommu-root.c
index e0e3e9d4385e2..4e6bf94413458 100644
--- a/drivers/iommu/hyperv/hv-iommu-root.c
+++ b/drivers/iommu/hyperv/hv-iommu-root.c
@@ -12,6 +12,7 @@
 #include "../dma-iommu.h"
 
 static dma_addr_t hv_iommu_max_iova;
+static struct iommu_ops hv_iommu_ops;
 static struct iommu_domain_ops hv_paging_domain_ops;
 
 /* IOMMU device that we export to the world. MSHV supports max of one */
@@ -32,23 +33,6 @@ struct hv_iommu_mapping {
        u32 flags;
 };
 
-/*
- * By default, during boot the hypervisor creates one Stage 2 (S2) default
- * domain. It has two types:
- *   S2 default: access to entire root partition memory. This for the host
- *              maps to IOMMU_DOMAIN_IDENTITY in the iommu subsystem, and
- *              is called HV_DEVICE_DOMAIN_ID_S2_DEFAULT in the hypervisor.
- *              (Linux renamed to : HV_DEVICE_DOMAIN_ID_DEFAULT)
- *   S2 NULL: Blocks everything, ie, IOMMU_DOMAIN_BLOCKED in linux.
- */
-
-/*
- * Create dummy domains to correspond to hypervisor prebuilt default identity
- * and null domains (dummy because we do not make hypercalls to create them).
- */
-static struct hv_iommu_domain hv_def_identity_dom;
-static struct hv_iommu_domain hv_def_blocked_dom;
-
 /*
  * The hypervisor owns the IOMMU. As such it will choose the best page size
  * and whenever possible use larger page sizes automatically. The map gpa
@@ -488,6 +472,35 @@ static void hv_iommu_get_resv_regions(struct device *dev,
        iommu_add_resv_x86_msi_region(head);
 }
 
+static const struct iommu_domain_ops hv_special_domain_ops = {
+       .attach_dev = hv_iommu_attach_dev,
+};
+
+/*
+ * By default, during boot the hypervisor creates one Stage 2 (S2) default
+ * domain. It has two types:
+ *   S2 default: access to entire root partition memory. This for the host
+ *              maps to IOMMU_DOMAIN_IDENTITY in the iommu subsystem, and
+ *              is called HV_DEVICE_DOMAIN_ID_S2_DEFAULT in the hypervisor.
+ *              (Linux renamed to : HV_DEVICE_DOMAIN_ID_DEFAULT)
+ *   S2 NULL: Blocks everything, ie, IOMMU_DOMAIN_BLOCKED in linux.
+ * Create dummy domains to correspond to hypervisor prebuilt default identity
+ * and null domains (dummy because we do not make hypercalls to create them).
+ */
+static struct hv_iommu_domain hv_def_identity_dom = {
+       .iommu_dom.type = IOMMU_DOMAIN_IDENTITY,
+       .iommu_dom.ops = &hv_special_domain_ops,
+       .iommu_dom.owner = &hv_iommu_ops,
+       .domid_num = HV_DEVICE_DOMAIN_ID_DEFAULT, /* 0 */
+};
+
+static struct hv_iommu_domain hv_def_blocked_dom = {
+       .iommu_dom.type = IOMMU_DOMAIN_BLOCKED,
+       .iommu_dom.ops = &hv_special_domain_ops,
+       .iommu_dom.owner = &hv_iommu_ops,
+       .domid_num = HV_DEVICE_DOMAIN_ID_NULL,    /* INTMAX */
+};
+
 static struct iommu_domain_ops hv_paging_domain_ops = {
        .attach_dev = hv_iommu_attach_dev,
        .map_pages = hv_iommu_map_pages,
@@ -508,23 +521,6 @@ static struct iommu_ops hv_iommu_ops = {
        .release_domain     = &hv_def_blocked_dom.iommu_dom,
 };
 
-static const struct iommu_domain_ops hv_special_domain_ops = {
-       .attach_dev = hv_iommu_attach_dev,
-};
-
-static void __init hv_initialize_special_domains(void)
-{
-       hv_def_identity_dom.iommu_dom.type = IOMMU_DOMAIN_IDENTITY;
-       hv_def_identity_dom.iommu_dom.ops = &hv_special_domain_ops;
-       hv_def_identity_dom.iommu_dom.owner = &hv_iommu_ops;
-       hv_def_identity_dom.domid_num = HV_DEVICE_DOMAIN_ID_DEFAULT; /* 0 */
-
-       hv_def_blocked_dom.iommu_dom.type = IOMMU_DOMAIN_BLOCKED;
-       hv_def_blocked_dom.iommu_dom.ops = &hv_special_domain_ops;
-       hv_def_blocked_dom.iommu_dom.owner = &hv_iommu_ops;
-       hv_def_blocked_dom.domid_num = HV_DEVICE_DOMAIN_ID_NULL;    /* INTMAX */
-}
-
 /*
  * In general, the hypervisor does not support the capabilities hypercall for
  * root partitions, an exception was made for max_iova_width. For IOMMU cap,
@@ -571,11 +567,6 @@ static int __init hv_root_iommu_init(void)
 
        hv_iommu_max_iova = DMA_BIT_MASK(caps.max_iova_width);
 
-       /* This must come before iommu_device_register() because the latter
-        * calls into the hooks.
-        */
-       hv_initialize_special_domains();
-
        rc = iommu_device_sysfs_add(iommup, NULL, NULL, "%s", "hyperv-iommu");
        if (rc) {
                pr_err("Hyper-V: iommu_device_sysfs_add failed: %d\n", rc);


<snip>

Thanks,
Easwar (he/him)

Reply via email to