On Wed, Nov 11, 2026 at 12:53:21PM +0100, Thomas Zimmermann wrote:
> Hi
>
> Am 21.10.26 um 01:14 schrieb Hamza Mahfooz:
> > The Hyper-V synthetic video device lets the guest set the image and the
> > position of the mouse pointer, which RDP clients like the VM Connection
> > window then draw on their own, wherever their local mouse is. The driver
> > only used this to hide the pointer so far, leaving the cursor to be
> > drawn into the framebuffer, where it lags behind the mouse.
> >
> > Add a cursor plane that hands its image to the host instead. As the
> > clients draw the pointer at their mouse position, the hotspot needs to
> > be known, so set DRIVER_CURSOR_HOTSPOT.
> >
> > The host takes ARGB8888 images of up to 96x96 pixels, stored bottom-up
> > and sent in parts of at most 8 KiB. Fully transparent columns and rows
> > at the right and bottom, like the padding of a cursor buffer of the
> > maximum size, are left out to keep the messages small. RDP clients use
> > straight alpha for pointer images, so only advertise the "Coverage"
> > pixel blend mode.
> >
> > The host shows a small dot for a pointer marked invisible, so a hidden
> > cursor is sent as a single, almost transparent pixel instead, like
> > hv_drm_hide_hw_ptr() did, which this replaces. An image without any
> > visible pixel is sent likewise, as clients may draw it as an opaque box
> > otherwise.
> >
> > Clients connecting to the VM show a default pointer until they are sent
> > one, so keep a copy of the cursor and send it again when the host
> > reports a feature change as a client connects, and when the CRTC gets
> > enabled.
> >
> > NOTE: The predominant client (i.e. VMConnect) draws translucent pixels
> > as opaque ones blended onto black, this is a limitation of the client.
> >
> > Signed-off-by: Hamza Mahfooz <[email protected]>
> > ---
> > drivers/gpu/drm/hyperv/hyperv_drm.h | 37 +++-
> > drivers/gpu/drm/hyperv/hyperv_drm_drv.c | 13 +-
> > drivers/gpu/drm/hyperv/hyperv_drm_modeset.c | 170 +++++++++++++++-
> > drivers/gpu/drm/hyperv/hyperv_drm_proto.c | 211 ++++++++++++++++----
> > 4 files changed, 381 insertions(+), 50 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/hyperv/hyperv_drm.h
> > b/drivers/gpu/drm/hyperv/hyperv_drm.h
> > index f4262a37af36..df03185a2e19 100644
> > --- a/drivers/gpu/drm/hyperv/hyperv_drm.h
> > +++ b/drivers/gpu/drm/hyperv/hyperv_drm.h
> > @@ -13,10 +13,38 @@
> > #define VMBUS_MAX_PACKET_SIZE 0x4000
> > +#define SYNTHVID_CURSOR_MAX_X 96
> > +#define SYNTHVID_CURSOR_MAX_Y 96
> > +#define SYNTHVID_CURSOR_ARGB_PIXEL_SIZE 4
> > +#define SYNTHVID_CURSOR_MAX_SIZE (SYNTHVID_CURSOR_MAX_X * \
> > + SYNTHVID_CURSOR_MAX_Y * SYNTHVID_CURSOR_ARGB_PIXEL_SIZE)
> > +
> > +/*
> > + * Copy of the cursor last handed to the host, so that it can be sent again
> > + * when needed, e.g. after a VM Connection window was opened.
> > + */
> > +struct hv_drm_cursor {
> > + /* Serializes pointer messages and protects the fields below */
> > + struct mutex lock;
> > + /* The host may not have the cached shape, e.g. after a failed send */
> > + bool shape_stale;
> > + u32 width;
> > + u32 height;
> > + u32 hot_x;
> > + u32 hot_y;
> > + s32 x;
> > + s32 y;
> > + /* ARGB8888, rows of width pixels, stored bottom-up as the host wants */
> > + u8 image[SYNTHVID_CURSOR_MAX_SIZE];
> > + /* Scratch space for building pointer shape messages */
> > + u8 msg_buf[VMBUS_MAX_PACKET_SIZE];
> > +};
> > +
> > struct hv_drm_device {
> > /* drm */
> > struct drm_device dev;
> > struct drm_plane plane;
> > + struct drm_plane cursor_plane;
> > struct drm_crtc crtc;
> > struct drm_encoder encoder;
> > struct drm_connector connector;
> > @@ -40,6 +68,9 @@ struct hv_drm_device {
> > u8 init_buf[VMBUS_MAX_PACKET_SIZE];
> > u8 recv_buf[VMBUS_MAX_PACKET_SIZE];
> > + struct hv_drm_cursor *cursor;
> > + struct work_struct cursor_work;
>
> I didn't really get why this cursor_work is required. Can you elaborate?
>
The host sends out a SYNTHVID_FEATURE_CHANGE when a client (e.g.
VMConnect), connects and the driver answers it by sending the cursor
again (as hv_drm_hide_hw_ptr() did), otherwise the client can show the
the host's dot pointer instead of ours. The message arrives in a VMBus
channel callback (which runs in a tasklet). Also, hv_drm_hide_hw_ptr()
could be called directly from the callback since it was sending
relatively small messages.
> > +
> > struct hv_device *hdev;
> > };
> > @@ -52,8 +83,12 @@ int hv_drm_mode_config_init(struct hv_drm_device *hv);
> > int hv_drm_update_vram_location(struct hv_device *hdev, phys_addr_t
> > vram_pp);
> > int hv_drm_update_situation(struct hv_device *hdev, u8 active, u32 bpp,
> > u32 w, u32 h, u32 pitch);
> > -int hv_drm_hide_hw_ptr(struct hv_device *hdev);
> > +int hv_drm_cursor_init(struct hv_drm_device *hv);
> > +void hv_drm_cursor_set_hidden(struct hv_drm_cursor *cursor);
> > +void hv_drm_update_cursor(struct hv_drm_device *hv, bool shape);
> > +void hv_drm_restore_cursor(struct hv_drm_device *hv);
> > int hv_drm_update_dirt(struct hv_device *hdev, struct drm_rect *rect);
> > int hv_drm_connect_vsp(struct hv_device *hdev);
> > +void hv_drm_disconnect_vsp(struct hv_device *hdev);
> > #endif
> > diff --git a/drivers/gpu/drm/hyperv/hyperv_drm_drv.c
> > b/drivers/gpu/drm/hyperv/hyperv_drm_drv.c
> > index 031206a5b3d7..21e5fcc3eb68 100644
> > --- a/drivers/gpu/drm/hyperv/hyperv_drm_drv.c
> > +++ b/drivers/gpu/drm/hyperv/hyperv_drm_drv.c
> > @@ -26,7 +26,8 @@
> > DEFINE_DRM_GEM_FOPS(hv_drm_fops);
> > static struct drm_driver hv_drm_driver = {
> > - .driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_ATOMIC,
> > + .driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_ATOMIC |
> > + DRIVER_CURSOR_HOTSPOT,
> > .name = DRIVER_NAME,
> > .desc = DRIVER_DESC,
> > @@ -119,6 +120,10 @@ static int hv_drm_vmbus_probe(struct hv_device *hdev,
> > hv_set_drvdata(hdev, hv);
> > hv->hdev = hdev;
> > + ret = hv_drm_cursor_init(hv);
> > + if (ret)
> > + goto err_hv_set_drv_data;
> > +
> > ret = hv_drm_connect_vsp(hdev);
> > if (ret) {
> > drm_err(dev, "Failed to connect to vmbus.\n");
> > @@ -162,7 +167,7 @@ static int hv_drm_vmbus_probe(struct hv_device *hdev,
> > iounmap(hv->vram);
> > vmbus_free_mmio(hv->mem->start, hv->fb_size);
> > err_vmbus_close:
> > - vmbus_close(hdev->channel);
> > + hv_drm_disconnect_vsp(hdev);
> > err_hv_set_drv_data:
> > hv_set_drvdata(hdev, NULL);
> > return ret;
> > @@ -176,7 +181,7 @@ static void hv_drm_vmbus_remove(struct hv_device *hdev)
> > vmbus_set_skip_unload(false);
> > drm_dev_unplug(dev);
> > drm_atomic_helper_shutdown(dev);
> > - vmbus_close(hdev->channel);
> > + hv_drm_disconnect_vsp(hdev);
> > hv_set_drvdata(hdev, NULL);
> > iounmap(hv->vram);
> > @@ -197,7 +202,7 @@ static int hv_drm_vmbus_suspend(struct hv_device *hdev)
> > if (ret)
> > return ret;
> > - vmbus_close(hdev->channel);
> > + hv_drm_disconnect_vsp(hdev);
> > return 0;
> > }
> > diff --git a/drivers/gpu/drm/hyperv/hyperv_drm_modeset.c
> > b/drivers/gpu/drm/hyperv/hyperv_drm_modeset.c
> > index da399cb951a5..c9d02311afb5 100644
> > --- a/drivers/gpu/drm/hyperv/hyperv_drm_modeset.c
> > +++ b/drivers/gpu/drm/hyperv/hyperv_drm_modeset.c
> > @@ -6,6 +6,7 @@
> > #include <linux/hyperv.h>
> > #include <drm/drm_atomic.h>
> > +#include <drm/drm_blend.h>
> > #include <drm/drm_crtc_helper.h>
> > #include <drm/drm_damage_helper.h>
> > #include <drm/drm_drv.h>
> > @@ -110,7 +111,7 @@ static void hv_drm_crtc_helper_atomic_enable(struct
> > drm_crtc *crtc,
> > struct drm_plane_state *plane_state = plane->state;
> > struct drm_crtc_state *crtc_state = crtc->state;
> > - hv_drm_hide_hw_ptr(hv->hdev);
> > + hv_drm_restore_cursor(hv);
> > hv_drm_update_situation(hv->hdev, 1, hv->screen_depth,
> > crtc_state->mode.hdisplay,
> > crtc_state->mode.vdisplay,
> > @@ -241,6 +242,152 @@ static const struct drm_plane_funcs
> > hv_drm_plane_funcs = {
> > DRM_PANIC_PLANE_FUNCS,
> > };
> > +static const u32 hv_drm_cursor_formats[] = {
> > + DRM_FORMAT_ARGB8888,
> > +};
> > +
> > +static int hv_drm_cursor_atomic_check(struct drm_plane *plane,
> > + struct drm_atomic_commit *state)
> > +{
> > + struct drm_plane_state *plane_state =
> > drm_atomic_get_new_plane_state(state, plane);
> > + struct drm_crtc *crtc = plane_state->crtc;
> > + struct drm_crtc_state *crtc_state = NULL;
> > + int ret;
> > +
> > + if (crtc)
> > + crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
> > +
> > + ret = drm_atomic_helper_check_plane_state(plane_state, crtc_state,
> > + DRM_PLANE_NO_SCALING,
> > + DRM_PLANE_NO_SCALING,
> > + true, true);
> > + if (ret)
> > + return ret;
> > +
> > + if (!plane_state->fb)
> > + return 0;
>
> Please test for !plane_state->visible. This will catch all relevant cases,
> including !fb.
>
> > +
> > + if (!plane_state->crtc_w || plane_state->crtc_w > SYNTHVID_CURSOR_MAX_X
> > ||
> > + !plane_state->crtc_h || plane_state->crtc_h >
> > SYNTHVID_CURSOR_MAX_Y) {
> > + drm_dbg_atomic(plane->dev, "Invalid cursor size %ux%u\n",
> > + plane_state->crtc_w, plane_state->crtc_h);
>
> Drivers should only use drm_dbg().
>
> > + return -EINVAL;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +/*
> > + * Copy the cursor image to the cache, bottom-up as the host wants it.
> > Fully
> > + * transparent columns and rows at the right and bottom, like the padding
> > of
> > + * a cursor buffer of the maximum size, are left out.
> > + */
> > +static void hv_drm_cursor_load(struct hv_drm_cursor *cursor,
> > + const struct drm_plane_state *state,
> > + const struct iosys_map *map)
> > +{
> > + size_t pitch = state->fb->pitches[0];
> > + size_t offset = (state->src_y >> 16) * pitch + (state->src_x >> 16) *
> > + SYNTHVID_CURSOR_ARGB_PIXEL_SIZE;
> > + u32 hot_x = clamp_t(s32, state->hotspot_x, 0, state->crtc_w - 1);
> > + u32 hot_y = clamp_t(s32, state->hotspot_y, 0, state->crtc_h - 1);
> > + u32 width = 0, height = 0;
> > + u32 x, y;
> > +
> > + for (y = 0; y < state->crtc_h; y++) {
> > + for (x = state->crtc_w; x; x--) {
> > + if (iosys_map_rd(map,
> > + (offset + y * pitch + x *
> > + SYNTHVID_CURSOR_ARGB_PIXEL_SIZE - 1),
> > + u8))
> > + break;
> > + }
> > +
> > + if (x) {
> > + width = max(width, x);
> > + height = y + 1;
> > + }
> > + }
> > +
> > + if (!width) {
> > + hv_drm_cursor_set_hidden(cursor);
> > + return;
> > + }
> > +
> > + /* Keep the hotspot within the image */
> > + width = max(width, hot_x + 1);
> > + height = max(height, hot_y + 1);
> > +
> > + for (y = 0; y < height; y++)
> > + iosys_map_memcpy_from((cursor->image + (height - 1 - y) *
> > + width * SYNTHVID_CURSOR_ARGB_PIXEL_SIZE),
> > + map, offset + y * pitch,
> > + width * SYNTHVID_CURSOR_ARGB_PIXEL_SIZE);
> > +
> > + cursor->width = width;
> > + cursor->height = height;
> > + cursor->hot_x = hot_x;
> > + cursor->hot_y = hot_y;
> > +}
> > +
> > +static void hv_drm_cursor_hide(struct hv_drm_device *hv)
> > +{
> > + struct hv_drm_cursor *cursor = hv->cursor;
> > +
> > + scoped_guard(mutex, &cursor->lock) {
> > + hv_drm_cursor_set_hidden(cursor);
> > + hv_drm_update_cursor(hv, true);
> > + }
> > +}
> > +
> > +static void hv_drm_cursor_atomic_update(struct drm_plane *plane,
> > + struct drm_atomic_commit *state)
> > +{
> > + struct hv_drm_device *hv = to_hv_drm(plane->dev);
> > + struct drm_plane_state *old_state =
> > drm_atomic_get_old_plane_state(state, plane);
> > + struct drm_plane_state *new_state =
> > drm_atomic_get_new_plane_state(state, plane);
> > + struct drm_shadow_plane_state *shadow_plane_state =
> > to_drm_shadow_plane_state(new_state);
> > + struct hv_drm_cursor *cursor = hv->cursor;
> > + bool shape;
> > +
> > + if (!new_state->visible) {
> > + if (old_state->visible)
> > + hv_drm_cursor_hide(hv);
> > + return;
> > + }
> > +
> > + shape = !old_state->visible || old_state->fb != new_state->fb ||
> > + old_state->src_x != new_state->src_x ||
> > + old_state->src_y != new_state->src_y ||
> > + old_state->src_w != new_state->src_w ||
> > + old_state->src_h != new_state->src_h ||
> > + old_state->hotspot_x != new_state->hotspot_x ||
> > + old_state->hotspot_y != new_state->hotspot_y;
> > +
> > + scoped_guard(mutex, &cursor->lock) {
> > + if (shape)
> > + hv_drm_cursor_load(cursor, new_state,
> > + &shadow_plane_state->data[0]);
> > +
> > + cursor->x = new_state->crtc_x;
> > + cursor->y = new_state->crtc_y;
> > + hv_drm_update_cursor(hv, shape);
> > + }
> > +}
> > +
> > +static void hv_drm_cursor_atomic_disable(struct drm_plane *plane,
> > + struct drm_atomic_commit *state)
> > +{
> > + hv_drm_cursor_hide(to_hv_drm(plane->dev));
> > +}
> > +
> > +static const struct drm_plane_helper_funcs hv_drm_cursor_helper_funcs = {
> > + DRM_GEM_SHADOW_PLANE_HELPER_FUNCS,
> > + .atomic_check = hv_drm_cursor_atomic_check,
> > + .atomic_update = hv_drm_cursor_atomic_update,
> > + .atomic_disable = hv_drm_cursor_atomic_disable,
> > +};
> > +
> > static const struct drm_encoder_funcs hv_drm_simple_encoder_funcs_cleanup
> > = {
> > .destroy = drm_encoder_cleanup,
> > };
> > @@ -250,6 +397,7 @@ static inline int hv_drm_pipe_init(struct hv_drm_device
> > *hv)
> > struct drm_device *dev = &hv->dev;
> > struct drm_encoder *encoder = &hv->encoder;
> > struct drm_plane *plane = &hv->plane;
> > + struct drm_plane *cursor = &hv->cursor_plane;
> > struct drm_crtc *crtc = &hv->crtc;
> > struct drm_connector *connector = &hv->connector;
> > int ret;
> > @@ -264,7 +412,23 @@ static inline int hv_drm_pipe_init(struct
> > hv_drm_device *hv)
> > drm_plane_helper_add(plane, &hv_drm_plane_helper_funcs);
> > drm_plane_enable_fb_damage_clips(plane);
> > - ret = drm_crtc_init_with_planes(dev, crtc, plane, NULL,
> > + ret = drm_universal_plane_init(dev, cursor, 0,
> > + &hv_drm_plane_funcs,
> > + hv_drm_cursor_formats,
> > + ARRAY_SIZE(hv_drm_cursor_formats),
> > + hv_drm_modifiers,
> > + DRM_PLANE_TYPE_CURSOR, NULL);
> > + if (ret)
> > + return ret;
> > + drm_plane_helper_add(cursor, &hv_drm_cursor_helper_funcs);
> > +
> > + /* The cursor image reaches the host's clients with straight alpha */
> > + ret = drm_plane_create_blend_mode_property(cursor,
> > +
> > BIT(DRM_MODE_BLEND_COVERAGE));
> > + if (ret)
> > + return ret;
> > +
> > + ret = drm_crtc_init_with_planes(dev, crtc, plane, cursor,
> > &hv_drm_crtc_funcs, NULL);
> > if (ret)
> > return ret;
> > @@ -320,6 +484,8 @@ int hv_drm_mode_config_init(struct hv_drm_device *hv)
> > dev->mode_config.min_height = 0;
> > dev->mode_config.max_width = hv->screen_width_max;
> > dev->mode_config.max_height = hv->screen_height_max;
> > + dev->mode_config.cursor_width = SYNTHVID_CURSOR_MAX_X;
> > + dev->mode_config.cursor_height = SYNTHVID_CURSOR_MAX_Y;
> > dev->mode_config.preferred_depth = hv->screen_depth;
> > dev->mode_config.prefer_shadow = 0;
> > diff --git a/drivers/gpu/drm/hyperv/hyperv_drm_proto.c
> > b/drivers/gpu/drm/hyperv/hyperv_drm_proto.c
> > index 8ddd34833941..0f3e64fc73ac 100644
> > --- a/drivers/gpu/drm/hyperv/hyperv_drm_proto.c
> > +++ b/drivers/gpu/drm/hyperv/hyperv_drm_proto.c
> > @@ -5,6 +5,7 @@
> > #include <linux/hyperv.h>
> > +#include <drm/drm_managed.h>
> > #include <drm/drm_print.h>
> > #include "hyperv_drm.h"
> > @@ -111,12 +112,9 @@ struct synthvid_pointer_position {
> > s32 image_y;
> > } __packed;
> > -#define SYNTHVID_CURSOR_MAX_X 96
> > -#define SYNTHVID_CURSOR_MAX_Y 96
> > -#define SYNTHVID_CURSOR_ARGB_PIXEL_SIZE 4
> > -#define SYNTHVID_CURSOR_MAX_SIZE (SYNTHVID_CURSOR_MAX_X * \
> > - SYNTHVID_CURSOR_MAX_Y * SYNTHVID_CURSOR_ARGB_PIXEL_SIZE)
> > #define SYNTHVID_CURSOR_COMPLETE (-1)
> > +/* Most pixel data the host accepts in one pointer shape message */
> > +#define SYNTHVID_CURSOR_MAX_PAYLOAD 8192
> > struct synthvid_pointer_shape {
> > u8 part_idx;
> > @@ -286,47 +284,163 @@ int hv_drm_update_situation(struct hv_device *hdev,
> > u8 active, u32 bpp,
> > }
> > /*
> > - * Hyper-V supports a hardware cursor feature. It's not used by Linux VM,
> > - * but the Hyper-V host still draws a point as an extra mouse pointer,
> > - * which is unwanted, especially when Xorg is running.
> > - *
> > - * Hide the unwanted pointer, by setting msg.ptr_pos.is_visible = 1 and
> > setting
> > - * the msg.ptr_shape.data. Note: setting msg.ptr_pos.is_visible to 0
> > doesn't
> > - * work in tests.
> > - *
> > - * The hv_drm_hide_hw_ptr() is also called in the handler of the
> > - * SYNTHVID_FEATURE_CHANGE event, otherwise the host still draws an extra
> > - * unwanted mouse pointer after the VM Connection window is closed and
> > reopened.
> > + * The host always shows a mouse pointer: the one set with the pointer
> > shape
> > + * and position messages, or else a small dot, which is also what it shows
> > + * for a pointer marked invisible. A hidden cursor is therefore a single,
> > + * almost transparent pixel.
>
> This policy is mandated by hyperv host itself?
>
Yup, when a client connects, the host shows it a small dot as the
pointer until the guest sets one (this is hardcoded into the host
implementation).
Hamza
>
> > */
> > -int hv_drm_hide_hw_ptr(struct hv_device *hdev)
> > +static const u8
> > hv_drm_cursor_hidden_pixel[SYNTHVID_CURSOR_ARGB_PIXEL_SIZE] = {
> > + 0x00, 0x01, 0x01, 0x01
> > +};
>
> I was wondering about 0x01 until I re-read the commit description. Maybe
> mention here why it's not all zeros.
>
> Best regards
> Thomas
>
> > +
> > +void hv_drm_cursor_set_hidden(struct hv_drm_cursor *cursor)
> > {
> > - struct synthvid_msg msg;
> > + memcpy(cursor->image, hv_drm_cursor_hidden_pixel,
> > + sizeof(hv_drm_cursor_hidden_pixel));
> > + cursor->width = 1;
> > + cursor->height = 1;
> > + cursor->hot_x = 0;
> > + cursor->hot_y = 0;
> > + cursor->x = 0;
> > + cursor->y = 0;
> > +}
> > - memset(&msg, 0, sizeof(struct synthvid_msg));
> > - msg.vid_hdr.type = SYNTHVID_POINTER_POSITION;
> > - msg.vid_hdr.size = sizeof(struct synthvid_msg_hdr) +
> > +/*
> > + * Pointer shapes too large for one message are sent in parts numbered from
> > + * 0, with SYNTHVID_CURSOR_COMPLETE marking the last part. A shape that
> > fits
> > + * in one message is sent as a lone SYNTHVID_CURSOR_COMPLETE part.
> > + */
> > +static int hv_drm_send_ptr_shape(struct hv_drm_device *hv, u32 width,
> > + u32 height, u32 hot_x, u32 hot_y,
> > + const u8 *image)
> > +{
> > + const size_t data_offset = offsetof(struct synthvid_msg,
> > + ptr_shape.data);
> > + size_t size = width * height * SYNTHVID_CURSOR_ARGB_PIXEL_SIZE;
> > + u8 *buf = hv->cursor->msg_buf;
> > + struct synthvid_msg *msg;
> > + size_t offset = 0;
> > + u8 part = 0;
> > + size_t len;
> > + int ret;
> > +
> > + BUILD_BUG_ON((offsetof(struct synthvid_msg, ptr_shape.data) +
> > + SYNTHVID_CURSOR_MAX_PAYLOAD) >
> > + sizeof_field(struct hv_drm_cursor, msg_buf));
> > +
> > + msg = (struct synthvid_msg *)buf;
> > +
> > + do {
> > + len = min(size - offset, SYNTHVID_CURSOR_MAX_PAYLOAD);
> > +
> > + memset(buf, 0, data_offset);
> > + msg->vid_hdr.type = SYNTHVID_POINTER_SHAPE;
> > + msg->vid_hdr.size = sizeof(struct synthvid_msg_hdr) +
> > + offsetof(struct synthvid_pointer_shape, data) + len;
> > + if (offset + len < size)
> > + msg->ptr_shape.part_idx = part++;
> > + else
> > + msg->ptr_shape.part_idx = SYNTHVID_CURSOR_COMPLETE;
> > + msg->ptr_shape.is_argb = 1;
> > + msg->ptr_shape.width = width;
> > + msg->ptr_shape.height = height;
> > + msg->ptr_shape.hot_x = hot_x;
> > + msg->ptr_shape.hot_y = hot_y;
> > + memcpy(buf + data_offset, image + offset, len);
> > +
> > + ret = hv_drm_sendpacket(hv->hdev, msg);
> > + if (ret)
> > + return ret;
> > +
> > + offset += len;
> > + } while (offset < size);
> > +
> > + return 0;
> > +}
> > +
> > +static int hv_drm_send_ptr_position(struct hv_drm_device *hv, s32 x, s32 y)
> > +{
> > + struct synthvid_msg *msg = (struct synthvid_msg *)hv->cursor->msg_buf;
> > +
> > + memset(msg, 0, sizeof(struct synthvid_msg));
> > + msg->vid_hdr.type = SYNTHVID_POINTER_POSITION;
> > + msg->vid_hdr.size = sizeof(struct synthvid_msg_hdr) +
> > sizeof(struct synthvid_pointer_position);
> > - msg.ptr_pos.is_visible = 1;
> > - msg.ptr_pos.video_output = 0;
> > - msg.ptr_pos.image_x = 0;
> > - msg.ptr_pos.image_y = 0;
> > - hv_drm_sendpacket(hdev, &msg);
> > + msg->ptr_pos.is_visible = 1;
> > + msg->ptr_pos.video_output = 0;
> > + msg->ptr_pos.image_x = x;
> > + msg->ptr_pos.image_y = y;
> > - memset(&msg, 0, sizeof(struct synthvid_msg));
> > - msg.vid_hdr.type = SYNTHVID_POINTER_SHAPE;
> > - msg.vid_hdr.size = sizeof(struct synthvid_msg_hdr) +
> > - sizeof(struct synthvid_pointer_shape);
> > - msg.ptr_shape.part_idx = SYNTHVID_CURSOR_COMPLETE;
> > - msg.ptr_shape.is_argb = 1;
> > - msg.ptr_shape.width = 1;
> > - msg.ptr_shape.height = 1;
> > - msg.ptr_shape.hot_x = 0;
> > - msg.ptr_shape.hot_y = 0;
> > - msg.ptr_shape.data[0] = 0;
> > - msg.ptr_shape.data[1] = 1;
> > - msg.ptr_shape.data[2] = 1;
> > - msg.ptr_shape.data[3] = 1;
> > - hv_drm_sendpacket(hdev, &msg);
> > + return hv_drm_sendpacket(hv->hdev, msg);
> > +}
> > +
> > +/*
> > + * Send the cached cursor to the host: the shape if @shape is set or the
> > host
> > + * may lack it, then the position. The position goes last as the host
> > applies
> > + * the hotspot of its current shape to it.
> > + */
> > +void hv_drm_update_cursor(struct hv_drm_device *hv, bool shape)
> > +{
> > + struct hv_drm_cursor *cursor = hv->cursor;
> > + int ret = 0;
> > +
> > + lockdep_assert_held(&cursor->lock);
> > +
> > + if (shape || cursor->shape_stale) {
> > + /*
> > + * The host may still be waiting for the rest of a multi-part
> > + * shape, and rejects new shapes until it gets a final part.
> > + * A one pixel shape completes any such shape, and is a valid
> > + * shape of its own otherwise.
> > + */
> > + if (cursor->shape_stale)
> > + ret = hv_drm_send_ptr_shape(hv, 1, 1, 0, 0,
> > + hv_drm_cursor_hidden_pixel);
> > + if (!ret)
> > + ret = hv_drm_send_ptr_shape(hv, cursor->width,
> > + cursor->height,
> > + cursor->hot_x,
> > + cursor->hot_y,
> > + cursor->image);
> > + cursor->shape_stale = ret;
> > + }
> > +
> > + hv_drm_send_ptr_position(hv, cursor->x, cursor->y);
> > +}
> > +
> > +void hv_drm_restore_cursor(struct hv_drm_device *hv)
> > +{
> > + scoped_guard(mutex, &hv->cursor->lock)
> > + hv_drm_update_cursor(hv, true);
> > +}
> > +
> > +static void hv_drm_restore_cursor_work(struct work_struct *work)
> > +{
> > + struct hv_drm_device *hv = container_of(work, struct hv_drm_device,
> > + cursor_work);
> > +
> > + hv_drm_restore_cursor(hv);
> > +}
> > +
> > +int hv_drm_cursor_init(struct hv_drm_device *hv)
> > +{
> > + struct hv_drm_cursor *cursor;
> > + int ret;
> > +
> > + cursor = drmm_kzalloc(&hv->dev, sizeof(*cursor), GFP_KERNEL);
> > + if (!cursor)
> > + return -ENOMEM;
> > +
> > + ret = drmm_mutex_init(&hv->dev, &cursor->lock);
> > + if (ret)
> > + return ret;
> > +
> > + hv_drm_cursor_set_hidden(cursor);
> > + cursor->shape_stale = true;
> > + hv->cursor = cursor;
> > +
> > + INIT_WORK(&hv->cursor_work, hv_drm_restore_cursor_work);
> > + disable_work(&hv->cursor_work);
> > return 0;
> > }
> > @@ -474,7 +588,7 @@ static void hv_drm_receive_sub(struct hv_device *hdev,
> > u32 bytes_recvd)
> > }
> > hv->dirt_needed = msg->feature_chg.is_dirt_needed;
> > if (hv->dirt_needed)
> > - hv_drm_hide_hw_ptr(hv->hdev);
> > + schedule_work(&hv->cursor_work);
> > return;
> > default:
> > return;
> > @@ -538,9 +652,11 @@ int hv_drm_connect_vsp(struct hv_device *hdev)
> > struct drm_device *dev = &hv->dev;
> > int ret;
> > + enable_work(&hv->cursor_work);
> > ret = vmbus_open(hdev->channel, VMBUS_RING_BUFSIZE, VMBUS_RING_BUFSIZE,
> > NULL, 0, hv_drm_receive, hdev);
> > if (ret) {
> > + disable_work_sync(&hv->cursor_work);
> > drm_err(dev, "Unable to open vmbus channel\n");
> > return ret;
> > }
> > @@ -574,6 +690,15 @@ int hv_drm_connect_vsp(struct hv_device *hdev)
> > return 0;
> > error:
> > - vmbus_close(hdev->channel);
> > + hv_drm_disconnect_vsp(hdev);
> > return ret;
> > }
> > +
> > +void hv_drm_disconnect_vsp(struct hv_device *hdev)
> > +{
> > + struct hv_drm_device *hv = hv_get_drvdata(hdev);
> > +
> > + /* Stop the work before vmbus_close() frees the ring buffers */
> > + disable_work_sync(&hv->cursor_work);
> > + vmbus_close(hdev->channel);
> > +}
>
> --
> --
> Thomas Zimmermann
> Graphics Driver Developer
> SUSE Software Solutions Germany GmbH
> Frankenstr. 146, 90461 Nürnberg, Germany, www.suse.com
> GF: Stefan Gaiser, Jochen Jaser, Abhinav Puri, (HRB 36809, AG Nürnberg)
>