The pci-hyperv driver scans the bus and assigns resources using pci_bus_assign_resources(). That function makes bridge window sizing disjoint from the assignment phase and is going to be removed.
Convert pci_bus_assign_resources() to pci_assign_unassigned_bus_resources(). If no other bridges are involved, the extra sizing should be no-op. Signed-off-by: Ilpo Järvinen <[email protected]> --- drivers/pci/controller/pci-hyperv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c index 824cf27e85e6..8eff3e9b325f 100644 --- a/drivers/pci/controller/pci-hyperv.c +++ b/drivers/pci/controller/pci-hyperv.c @@ -2549,7 +2549,7 @@ static int create_root_hv_pci_bus(struct hv_pcibus_device *hbus) pci_lock_rescan_remove(); hv_pci_assign_numa_node(hbus); - pci_bus_assign_resources(bridge->bus); + pci_assign_unassigned_bus_resources(bridge->bus); hv_pci_assign_slots(hbus); pci_bus_add_devices(bridge->bus); pci_unlock_rescan_remove(); -- 2.47.3
